Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   Wheels & Tires - Sponsored By Tire Rack (http://www.focusfanatics.com/forum/forumdisplay.php?f=50)
-   -   center bore size on 2013 focus se hatch (http://www.focusfanatics.com/forum/showthread.php?t=303475)

FocusHatch13 12-01-2012 05:04 PM

center bore size on 2013 focus se hatch
 
I have just ordered wheel adapters for the wheels I purchased and the bore size on the adapter is 73.1mm . Can someone please help me out and figure out my bore size.

FocusHatch13 12-01-2012 05:05 PM

Hub bore**

Zillon 12-01-2012 05:09 PM

63.4mm.

Use the search, next time. [:)]

FocusHatch13 12-01-2012 05:17 PM

Thanks I appreciate it.. if the adapter bore is bigger am I still able to use it?? Sorry I'm not a wheel guy.

Zillon 12-01-2012 05:22 PM

Quote:

Originally Posted by FocusHatch13 (Post 4479346)
Thanks I appreciate it.. if the adapter bore is bigger am I still able to use it?? Sorry I'm not a wheel guy.

As long as it's bigger than 63.4, you're good to go.

FocusHatch13 12-01-2012 05:24 PM

Thanks man you helped me out a lot I was getting stressed I switched my bolt pattern to 5x114.3 and ordered xxr 522s in gold

Zillon 12-01-2012 11:23 PM

You do realize that the hub adapters are going to effectively add 20-25mm to your wheels, right? You're going to be poking well past the fender.

FocusHatch13 12-02-2012 07:50 AM

Plus my wheel has a 35mm offset... I'm not going to rub right?? 17x8 with tire 225x45x17

FocusHatch13 12-02-2012 07:51 AM

The adapters are 1.25" spacing

FocusHatch13 12-02-2012 08:01 AM

The original offset of the st is like 50 55mm anyway right so I should be good


All times are GMT -5. The time now is 04:22 AM.


http://www.focusfanatics.com/aboutus/copyright.asp