Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   Wheels & Tires - Sponsored By Tire Rack (http://www.focusfanatics.com/forum/forumdisplay.php?f=50)
-   -   Anyone out there sell 10mm wheel spacers? (http://www.focusfanatics.com/forum/showthread.php?t=303371)

ChrisRobin 11-29-2012 10:18 PM

Anyone out there sell 10mm wheel spacers?
 
Anyone know of anyplace or anyone making 10mm spacers? There used to be one-off guys making them on ebay or something, and they were hubcentric as well. Right now all we have are either 5mm or 15mm.

rambleon84 11-30-2012 08:00 AM

fswerks list 5, 10, 15, 20, 25 and 30mm spacers....listed under their wheel section of the site. Made by H&R and hub centric

matmatician 11-30-2012 09:52 AM

Dang, beat me to it! Lol. I think andy's auto sells them too, but I'd got for the Fswerks any day. I've never had a bad experience with them.

Svizzara 11-30-2012 09:56 AM

http://fswerks.com/spacers.htm

EDIT: I don't know why the link doesn't work, but that's the source they mentioned. FSWerks homepage --> Products by type --> Wheels

ChrisRobin 11-30-2012 11:27 AM

Ok thanks guys... I'll check it out.

Sent from my HTC Desire HD A9191 using FF Mobile

matmatician 11-30-2012 12:09 PM

Love the avatar by the way... Check if your $hitter was full anytime recently?

Post some pics if you end up getting some man! I'm gonna get spacers for mine at some point, just don't know when. I've been thinking about 15's, i really wanna widen it out.

Oh, and check out the Pacific Northwest forum sometime! We have some pretty big get togethers that we've had a few canucks come down for, we're always looking for more brethren from north of the border!

thenorm 11-30-2012 03:13 PM

sometimes for hte ebay stores, just email them, they'll custom make the spacers u need.

Ox-y-GenIII 12-02-2012 06:23 PM

What material are wheel spacers usually made out of? Aluminum?

rambleon84 12-02-2012 06:57 PM

Quote:

Originally Posted by Ox-y-GenIII (Post 4480631)
What material are wheel spacers usually made out of? Aluminum?

The H&R's are made out of a proprietary aluminum/magnesium alloy...zee Germans say they are light and strong

ChrisRobin 12-02-2012 07:22 PM

Well based on the fact that 18x7.5 with 35et and with 205/40/18 tires is a tight enough fit, 10mm might be out. Might have to settle with 5mm front and rear
Sent from my HTC Desire HD A9191 using FF Mobile


All times are GMT -5. The time now is 01:03 AM.


http://www.focusfanatics.com/aboutus/copyright.asp