Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   MK3 Focus (http://www.focusfanatics.com/forum/forumdisplay.php?f=121)
-   -   Dtc numbers on test menu. (http://www.focusfanatics.com/forum/showthread.php?t=302782)

powermax 11-21-2012 09:31 AM

Took my new focus to McAlpine Dealer came back with 6 different DTC Codes!
 
I took my 2012 SE Sedan with 1500km for a vibration on the dash and roll-back got back a car shifting weird and with 6 DTC (diagnostic trouble codes) showing up.
Great Job McAlpine!
Here is a video of the codes.
YouTube Video
ERROR: If you can see this, then YouTube is down or you don't have Flash installed.

BetaDnB 11-21-2012 10:34 AM

What do the numbers look like? Gear ratios maybe?

PratoN 11-21-2012 10:52 AM

I'll check mine today as well.

powermax 11-21-2012 11:02 AM

im going to make a video of it I'll post it tonite.

suss6052 11-21-2012 11:03 AM

My factory built and original programming from my 4/23/12 build car with the 3/30/12 build date on the transmission case sticker/ part information allegedly does not mention anything specifically about the DCT other than Eco gearshift 2.30 or something similar and possibly one of the other two modules hardware codes.

powermax 11-21-2012 11:06 AM

Quote:

Originally Posted by suss6052 (Post 4465107)
My factory built and original programming from my 4/23/12 build car with the 3/30/12 build date on the transmission case sticker/ part information allegedly does not mention anything specifically about the DCT other than Eco gearshift 2.30 or something similar and possibly one of the other two modules hardware codes.

My showed Eco Shift N/A maybe is because it just got re-flashed and still in learning process.

powermax 11-21-2012 11:29 AM

Quote:

Originally Posted by BetaDnB (Post 4465061)
What do the numbers look like? Gear ratios maybe?

They are like DTC #1 C151_00 than DTC #2 C121_00 and so on.

suss6052 11-21-2012 11:35 AM

Quote:

Originally Posted by powermax (Post 4465136)
They are like DCT #1 151_00 than DCT #2 121_00 and so on.

That doesn't sound like gear ratios at all, it might be hex codes though, sounds more like DTC error codes however.

raptor1956 11-21-2012 01:27 PM

Quote:

Originally Posted by suss6052 (Post 4465151)
That doesn't sound like gear ratios at all, it might be hex codes though.


Looks more like parameter/value with P151=0 and P121=0, but that is just a guess...


Brian

Kabigon 11-21-2012 07:09 PM

Quote:

Originally Posted by powermax (Post 4464989)
My 2012 Focus Sedan SE build date 04/23/2012 had the pcm/tcm reprogramed and now when I go to the test menu when I get to DCT it goes from DCT #1 to #6 showing some numbers, I didn't have that before. What is that?

Are you sure that it is "DCT" and not "DTC"?


All times are GMT -5. The time now is 11:27 AM.


http://www.focusfanatics.com/aboutus/copyright.asp