Ford Focus Forum, Ford Focus ST Forum

Ford Focus Forum, Ford Focus ST Forum (http://www.focusfanatics.com/forum/index.php)
-   General Technical Chat (http://www.focusfanatics.com/forum/forumdisplay.php?f=47)
-   -   Intermediate servo accumulator spring and piston assembly (http://www.focusfanatics.com/forum/showthread.php?t=302463)

stwahlm 11-16-2012 07:42 PM

Intermediate servo accumulator spring and piston assembly
 
The assembly diagram for my 4F27E shows the spring and piston for the intermediate servo accumulator on the wrong side of the control valve lower body from how it gets installed. Should the spring be pressing against the lower body or the solenoid body?

amc49 11-16-2012 10:08 PM

The intermediate servo is in the trans case itself under the three bolt plate with a hole in it.

If you mean the small solenoid 'C' accumulator that goes between lower valve body and solenoid block itself, the cup goes against solenoid body and the spring against lower valve body.

Per ATSG manual..............just looked.

stwahlm 11-16-2012 11:14 PM

Yes, I was referring to the small solenoid 'C' accumulator. Thanks.


All times are GMT -5. The time now is 10:56 AM.