Ford Focus Forum, Ford Focus ST Forum

Ford Focus Forum, Ford Focus ST Forum (http://www.focusfanatics.com/forum/index.php)
-   Focus SVT (http://www.focusfanatics.com/forum/forumdisplay.php?f=65)
-   -   Rear Brake Parts (http://www.focusfanatics.com/forum/showthread.php?t=302207)

Barrow88 11-13-2012 05:27 PM

Rear Brake Parts
 
I was wondering if anyone would know where I could pickup these parts for the Rear Calipers. I need the 2 Brackets, Spring, & Bolt that the arrows are pointing to in the picture shown below for each caliper.

http://i244.photobucket.com/albums/g...542caliper.jpg

I've tried to look up part#'s from the aftermarket reman pictures but nothing so far so I figured I'd check here.

tukaniSVT 11-13-2012 07:33 PM

Have you tried Rock Auto? Or even the Ford Dealerships?

-Ray-

Sniper Focus 11-13-2012 08:29 PM

You might have to find them used sadly, maybe check with Steve at Tousley Ford he could tell you for sure.

BTW are you the guy that bought my buddy's car from Trenton?

Blue5ive 11-13-2012 08:30 PM

Get with Steve at Tousley Ford over on FJ. He can figure it out for you and availability.

Barrow88 11-13-2012 09:11 PM

Quote:

Originally Posted by Sniper Focus (Post 4454483)
You might have to find them used sadly, maybe check with Steve at Tousley Ford he could tell you for sure.

BTW are you the guy that bought my buddy's car from Trenton?

Yeah Im the one who bought the car.

I already contacted Tousley Ford parts department and they said that the only way I'll probably be able to get them is to buy remanufactured calipers that have them as they are a discontinued part from Ford. Sucks since I just bought what I thought was going to be everything to put the brakes on for $250 but guess Ill have to buy reman calipers, and new hubs W/ bearings along with the parking brake cable and new rotors but atleast Ill have rear discs which are getting harder and harder to get right now

Blue5ive 11-13-2012 09:25 PM

I bought a used rear kit(has everything) just to get the caliper mounting brackets. Gonna buy all new hubs/with bearings, spindles and rotors so whole setup is almost new. Thinking about calipers too but the ones I have are good.

felixthecat 11-19-2012 06:16 PM

Quote:

Originally Posted by Blue5ive (Post 4454564)
I bought a used rear kit(has everything) just to get the caliper mounting brackets. Gonna buy all new hubs/with bearings, spindles and rotors so whole setup is almost new. Thinking about calipers too but the ones I have are good.

I was going to get a set of reman calipers just to get those svt caliper brackets= wow spendy. Just a little more $ & I have TCE's Wilwood 11.75'' rotors. And they work w/o modifying the svt brackets.[woot] So now I have 13'' fronts w/ 11.75'' rears=[wiggle]

Blue5ive 11-19-2012 06:50 PM

Nice setup. Don't think any of the remanufactured calipers have the mount bracket as its a completely separate part. My used complete rear disc setup was only $150 shipped to me so it didn't cost much. The spindles are good so I may not buy new replacements. But since the hubs/bearings are used I figure just get new ones for about $170 pair. So a little over $300 and i'm done.

So what front brake setup do you have and cost? Also how much did the tce 11.75" rear cost? What parts does it require? Thinking about down the road improvements.

felixthecat 11-20-2012 08:28 PM

Quote:

Originally Posted by Blue5ive (Post 4462521)
Nice setup. Don't think any of the remanufactured calipers have the mount bracket as its a completely separate part. My used complete rear disc setup was only $150 shipped to me so it didn't cost much. The spindles are good so I may not buy new replacements. But since the hubs/bearings are used I figure just get new ones for about $170 pair. So a little over $300 and i'm done.

So what front brake setup do you have and cost? Also how much did the tce 11.75" rear cost? What parts does it require? Thinking about down the road improvements.

Baer's 13'' track kit. $600. And it comes w/ everthing you need. Just let Todd know what brakes you have to begin w/ 10's or 11's. I would have gotten Baer's 12'' kit, but discountinued. Todd also has front BBK's also, get the 13'' one thou.

Blue5ive 11-20-2012 08:55 PM

I thought Baer's 13" track kit required you to have the svt knuckles in order to install instead of the regular knuckles like on my zx5? I know you have an 05 ST which if im not mistaking already has the SVT style knuckle which allows you to readily bolt up the kit unlike the 00-04 non svt cars. Believe it was in 05 they changed the knuckles on the regular cars. If I'm wrong let me know cuz it be nice to get the 13" kit. Otherwise it's the svt kit first for the front.


All times are GMT -5. The time now is 03:37 AM.


http://www.focusfanatics.com/aboutus/copyright.asp