Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (http://www.focusfanatics.com/forum/index.php)
-   General Forced Induction (http://www.focusfanatics.com/forum/forumdisplay.php?f=44)
-   -   Fuel Pump for Boosted Zetec (http://www.focusfanatics.com/forum/showthread.php?t=301099)

J0EC00L 10-31-2012 01:02 AM

Fuel Pump for Boosted Zetec
 
Anyone have any experience with this new TRE fuel pump for Focus 00-08?

http://treperformance.com/i-6321435-...2000-2008.html

It sound like a good one. Specially designed for the returnless style fuel system. I was thinking of getting it for my 01 Zetec that I am installing a Top Speed Stage 2 Turbo Kit on this winter.

I was thinking of getting a KB BAP also.

Any thoughts?

Thanks,
Joe

hardSVT 10-31-2012 03:17 AM

Kb ftw


Sent from my iPhone using Smackatalk

1turbofocus 10-31-2012 10:23 AM

Doesnt look like anything more then a universal fuel pump to me , If your shooting for over 350HP to the wheels need to go to a return fuel system

Tom

ZXthrizzle05 10-31-2012 10:59 AM

Do a svt fuel pump with a BAP.

J0EC00L 10-31-2012 03:36 PM

Quote:

Originally Posted by 1turbofocus (Post 4432468)
Doesnt look like anything more then a universal fuel pump to me , If your shooting for over 350HP to the wheels need to go to a return fuel system

Tom

Even with the BAP >350HP?

Should I even get the BAP then for >350HP?

BTW - I am going to buy one of your long blocks soon Tom for my Turbo to go on.

300-350 should be more than enough for my daily driver needs but
If I decide to go for more than 350HP
Tom - can you tell me what I need to buy to do a full return style fuel system? What fuel pump - lines - do I need a pressure regulator for a return style? Which one.

Thanks,
Joe

ZXthrizzle05 10-31-2012 04:44 PM

You need a bap with FI,the fuel pump wattage can't keep up with the fuel pressure needed with WOT pulls.

LouBomb 10-31-2012 05:10 PM

I did the svt fuel pump with a return fuel system.. I have yet to reach 300+ but its in the works.

J0EC00L 10-31-2012 05:55 PM

Quote:

Originally Posted by J0EC00L (Post 4433009)
Even with the BAP >350HP?

Should I even get the BAP then for >350HP?

BTW - I am going to buy one of your long blocks soon Tom for my Turbo to go on.

300-350 should be more than enough for my daily driver needs but
If I decide to go for more than 350HP
Tom - can you tell me what I need to buy to do a full return style fuel system? What fuel pump - lines - do I need a pressure regulator for a return style? Which one.

Thanks,
Joe


I just realized that I put greater than > signs and they should have been less than < signs.

I am going to try the TRE pump with a BAP and see what happens. Worst case is I keep her 300-350HP and that is ok with me.

Joe

1turbofocus 10-31-2012 07:01 PM

The problem isnt the Focus fuel pumps , the problem is the cannister and the internal return system

I would do the stock pump for right now , then add the B-A-P if / when needed this will get you to 300 easy

then if you want / need more add a full return fuel system

Tom

ZXthrizzle05 10-31-2012 11:11 PM

My stock pump with bap didn't produce enough for 16psi. Wich is whyi have to run 10 for now until I get all the parts for return


All times are GMT -5. The time now is 09:51 AM.