Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   Massive Speed (http://www.focusfanatics.com/forum/forumdisplay.php?f=102)
-   -   camber arms and toe arms (http://www.focusfanatics.com/forum/showthread.php?t=300954)

bbcobra 10-29-2012 09:39 AM

camber arms and toe arms
 
I just installed the camber and toe arms on mine this weekend. I like the quality.
I forgot to measure when I had it up on the jacks but what size is the jam nut? I used a adjustable wrench to tighten them but an open end wrench would allow more easy access but I didn't have one that big.

Oh I thought I'd mention that yo may want to offer a reminder to those folks that install the camber arms that they need to know if a set of M12x1.75 nuts may be needed also. I had to get a couple since my trailing arms had been modified to allow for a camber bolt kit. The factory nut is cut off the trailing arm bracket to put the camber bolt kit on.

K Dog 10-29-2012 12:28 PM

It's a 15/16" hex. Lots of folks use an adjustable tho.

bbcobra 10-29-2012 12:34 PM

ok, thanks.


All times are GMT -5. The time now is 02:46 PM.


http://www.focusfanatics.com/aboutus/copyright.asp