Ford Focus Forum, Ford Focus ST Forum

Ford Focus Forum, Ford Focus ST Forum (http://www.focusfanatics.com/forum/index.php)
-   ZETEC Performance (2000-2004) (http://www.focusfanatics.com/forum/forumdisplay.php?f=39)
-   -   header question (http://www.focusfanatics.com/forum/showthread.php?t=300904)

jchaps zx3 10-28-2012 12:44 PM

header question
 
im looking at the OBX Racing 4-1 SS Exhaust Manifold Header 00-04 Ford Focus 2.0L Zetec ZX3 . im wondering if this set up will still set of the check engine code ?
[ffrocks]

wannabe_svt 10-28-2012 02:47 PM

It shouldn't. I have one and no light

jchaps zx3 10-28-2012 03:12 PM

thanks im just not wanting to spend all the money on a cat

wannabe_svt 10-28-2012 04:21 PM

You should be ok I'm not sure about the stock cat cause I did a cat back at the same time

Marbs 10-28-2012 04:41 PM

If it does, there is a thread to show you how to fix it. It's easy and will take 20minutes or less.

jchaps zx3 10-28-2012 06:46 PM

its has the down pipe but still have the spots for the o2 sensors

TerryB 10-29-2012 12:34 PM

I bought that set-up second hand. I tried every ratchet, universal, and wobble socket I had and couldn't get all the manifold bolts on. I ended up just going with the downpipe. The previous owner did have it installed. I could see the msrks from the manifold bolts. If you do buy it and get it installed, let me know how you did it. You will get a CEL, it's not a cat converter. Just a honeycombed pipe. I have a cheater to keep the light off.

Magus2727 10-29-2012 12:42 PM

Does it have a bung for the EGR?

DueceCoupe 10-29-2012 02:00 PM

Buy the SVT header and do it right.

TerryB 10-29-2012 02:21 PM

Here's the one I have.
http://i89.photobucket.com/albums/k2...esCAT9XZG0.jpg


All times are GMT -5. The time now is 11:30 PM.


http://www.focusfanatics.com/aboutus/copyright.asp