Base fuel doesn't match ?
This is what I'm commanding:
This is what I'm averaging:
What I've tried,
Turning Adaptive on - I wasn't sure if the base table was dependent on it or not, does not seem to be ... which is what I thought, just wanted to make sure.
I pulled 0.02% from the low injector slope - LTFT's pointed to this; but maybe I should have pulled from the high slope. This did help lean it out, just not enough.
I don't think it's a MTF issue at all. Prior to leaning the car out the MTF was almost perfect, every segment was +/- 0.01% (I'm a perfectionist).
I think I need to adjust the injector slopes to get the results I want. Just making sure.
Adjust the MTF , thats your WOT (OL) tables pictured , adjust the MTF to get your targeted air fuel
Why do you have your base fuel tables changed down so low of a TPS ? Do you have the TPS set to go OL that low ?
Base fuel is only for OL?
I didn't know that. I just assumed it was all fueling.
I didn't want to use the MTF to try this lean burn thing.
Maybe I'm better off forcing OL?
Just reread the description and it clearly says base fuel if for OL/WOT.
Well now I feel like quite the idiot.
We all know your not an idiot , I learn something new every day or I feel I am not doing enough LOL
You should play with some of this new MAP or drive by wire cars
|All times are GMT -5. The time now is 07:04 AM.|