Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   MK3 Focus (http://www.focusfanatics.com/forum/forumdisplay.php?f=121)
-   -   Window tint with rear defroster (http://www.focusfanatics.com/forum/showthread.php?t=298896)

Katemck 10-01-2012 11:53 PM

Window tint with rear defroster
 
Hello, I was wondering about tinting the rear window on my focus. I'm planning to do it myself, all I need to know is what to do about the rear defrost. Can the tint be applied on top of the defroster a or will that cause it to bubble? Do I need to cut slits in it? Also, please keep the comments to yourself about me being a girl or about how I need to go to a pro... I've heard all that :)

Touring05 10-01-2012 11:57 PM

you can just apply the tint over the defroster line. it will be no problem at all. Theres no need to cut it up to slits or anything like that.[burnout]

Touring05 10-01-2012 11:59 PM

also there will be no bubbles if you clean the windows and make sure there are no dust particles btw the tint and window

whimsicalpouch2 10-02-2012 12:20 AM

just have a shop do it professionally. then theres probably some warranty and they should be good enough with cleaning and making sure theres little to no bubbles

Dark 007 10-02-2012 01:10 AM

I'd say, you should go for it! Try searching for the pre-cut window tint. It'll be way much easier if you're gonna do it yourself. [:D]


Posted via iPhone using FF Mobile

Some Guy From NY 10-02-2012 06:53 AM

Tinting is a lot more difficult than it looks. Pay someone to do it. Use high quality tint such as Llumar or 3M. Stay away from Suntek & Sungard.

cheekedave 10-02-2012 07:35 AM

You girl! Go to a pro. Sheesh.

Sorry, I had to :) But in all honesty, I use this one guy near me to do it; he quoted me $200 cash and always gives me a lifetime warranty. Much easier to go that route and not mess with it yourself.

Luki13 10-02-2012 08:49 AM

If you've never done tint yourself, take it to a shop. The curved surfaces are such a P.I.T.A.

The pre-cut stuff can save some headaches if you get it started correctly. Good Luck!

Tiger-Heli 10-02-2012 09:03 AM

Not something I'd want to do myself when you can have it done usually under $200 labor and materials with a warranty.

No problems with the defroster grids as others have stated, though.

dyn085 10-02-2012 10:19 PM

Tinting a curved surface is difficult, but not impossible. If you're only doing the rear, then you should have a couple shots out of a roll. There are some good video's on youtube showing how to go about laying out, shrinking, and applying film to curved surfaces like that, I would take a look. You can shrink with just a blow-dryer, you don't need a heat gun (though it does speed the process up).

Just ensure that you don't knick the defroster lines with anything sharp and you should be good to go[thumb]


All times are GMT -5. The time now is 06:51 AM.


http://www.focusfanatics.com/aboutus/copyright.asp