Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (http://www.focusfanatics.com/forum/index.php)
-   Archive (http://www.focusfanatics.com/forum/forumdisplay.php?f=103)
-   -   New Steeda Front Swaybar for 2012 Ford Focus (http://www.focusfanatics.com/forum/showthread.php?t=298658)

SteedaBrandon 09-28-2012 03:59 PM

New Steeda Front Swaybar for 2012 Ford Focus
 
Check out our newly-released front swaybar for the 2012 Ford Focus!! Let me know if I can help you with anything.

http://www.steedafocus.com/parts/ima...w/555-1089.jpg

Steeda Focus Front Swaybar - 2012 - $199.95

Quote:

Steeda’s light weight front swaybar for the 2012 Focus is a light weight tubular design. Made from cold formed high strength steel, this bar reduces body roll, improves cornering feel, and improves overall traction during cornering. Directly replaces the factory swaybar. This 26mm bar gives a 55 percent increase in roll stiffness. Powdercoated silver for great looks and corrosion resistance.

Product Benefits
  • 55 percent stiffer than factory swaybar
  • Reduces body roll
  • Does not require any permanent modifications to car


felixthecat 10-21-2012 08:21 PM

Awesome 26mm f bar. You guys have or working on the rear bars? Or ST rear wheel knuckle/ trailing arm assembly for your ST bar, for people w/ none ST model?

greg hazlett 11-29-2012 05:38 PM

The Steeda RSB has been out for a while now.

Hellman 01-20-2013 02:34 PM

I recently purchesed the front and rear sway bars, i installed the rear on no problem. On the front do you have to drop the subframe and install it, i was looking at it (it came with no instructions) and there is not way to get it out. or remove the steering rack. also, are the nuts torqued to yeild.

greg hazlett 01-20-2013 02:55 PM

Yes you do have to drop it and the lower the better to get the stock FSB out; I used the Ford handling pack instructions and they were pretty good, do you have them and if not I will post them here.

greg hazlett 01-20-2013 02:56 PM

http://www.fordracingparts.com/downl...htM-FR3-FS.pdf

Hellman 01-20-2013 03:36 PM

much obliged

greg hazlett 01-20-2013 03:53 PM

Good luck with it and let me know if you have any questions![cheers]


All times are GMT -5. The time now is 06:05 AM.