Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (http://www.focusfanatics.com/forum/index.php)
-   General Technical Chat (http://www.focusfanatics.com/forum/forumdisplay.php?f=47)
-   -   Help! 2003 Ford Focus ZX5 - O2 sensor (http://www.focusfanatics.com/forum/showthread.php?t=298521)

zeicher 09-26-2012 06:58 PM

Help! 2003 Ford Focus ZX5 - O2 sensor
 
ok I have a 2003 ford focus zx5 2.0l dual overcam.....heres my problem.

got the sensor 1 bank 1 error, so we replaced both O2 sensors, the upstream and downstream.

my car still idles funny and rough and the check engine light is on.


any ideas/suggestions of what we can try next before i am forced to take it into the dealership.

thank you for all the help and advise in advance

pasta 09-26-2012 08:56 PM

hope you didnt put the bosch sensors ford do not like them go to tousleyford.com oem

zeicher 09-27-2012 06:43 AM

we purchased the O2 sensors from the ford dealership

sleepyboy 09-27-2012 06:48 AM

Welcome to the forum. [welcome] [ffrocks] [loveff]



Try checking the PCV hose. It's known to cause idle and lean issues along with bad gas mileage. Here is a thread about it HERE

zeicher 09-27-2012 07:05 AM

thank you! i am glad to find a group so dedicated to the Focus

do you know what the link is?

sleepyboy 09-27-2012 07:26 AM

The link is in the word HERE, but here is the link again not embedded into a word

http://www.focusfanatics.com/forum/showthread.php?t=190218


It's a how to on how to change the hose. This will help you find where the hose is so you can feel what shape yours is in and how to change it.

zeicher 09-27-2012 04:52 PM

thank you so much for your help! i want to do everything i can to keep my focus running

zeicher 09-28-2012 08:58 PM

ok, replaced the hose, still no better.

Any other ideas?

sleepyboy 09-29-2012 05:30 AM

The Idle Air Control valve would be my next guess. You can try removing it and cleaning it. That may help or even fix it. They are kind of pricey so that's why a lot of us clean them. Most of the time it works. You can clean it with Brake Cleaner and a little brush. Here is a how to on replacing it. You don't have to take the intake manifold off but it's a tight squeeze. LINK

zeicher 09-29-2012 09:06 AM

alright we will try that the pics i think confused me more then most but my bf will figure it out, he is a die hard Camaro fan and works on his 82. so this is new to him but he is appreciating all the help and photos.


All times are GMT -5. The time now is 05:03 AM.