Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   MK2 Focus (http://www.focusfanatics.com/forum/forumdisplay.php?f=120)
-   -   Rear sway bar end links and bushings. (http://www.focusfanatics.com/forum/showthread.php?t=298388)

pat88 09-24-2012 09:54 PM

Rear sway bar end links and bushings.
 
I have a 2009 coupe and I was wanting to replace the rear sway bar end links with some poly ones. I was also looking at replacing the bushings, but when i look around at some of the different sites they dont seem to have what i am looking for. So i was wondering if these would work for our years of car?

http://focus.c-f-m.com/prothane20mmr...cusexcsvt.aspx

badazz2010focus 09-25-2012 06:52 AM

they have to be universal from energy suspension or whomever you ever like.

indy_11 09-25-2012 07:06 AM

the bushings should work. we have a 20mm bar. as for the endlinks im not too sure. but i bought endliks for an asvt and they work so who knows

md11mx 10-08-2012 09:57 AM

Sugested solution
 
What I did with my ford aspire was I went to Moog's web site and found their p/n and went to NAPA's web site and converted the p/n and then call the counter for a stock check. This was for lower control arm bushings but I had them in my hand in about two and a half hours start to finish. I am not endorsing either of these vendors just trying to offer a method to resolve your problem.

DarderSauce 10-08-2012 02:20 PM

I don't suppose anyone would know where I could get a set of Bushing Brackets would they... Not to hijack the thread or anything. Here is an idea of what I am looking for... Greasable would be tits.

http://farm9.staticflickr.com/8036/8...b1f2409279.jpg
Brackets by DarderSauce, on Flickr

^^ Can't really seem to find any that I KNOW will work. Oh btw, my swaybar is 20mm

Gettysburg150 10-10-2012 08:20 AM

Ford Mo Co

DarderSauce 10-10-2012 08:24 AM

Quote:

Originally Posted by Gettysburg150 (Post 4397074)
Ford Mo Co

Ha ha for some reason they were the last place I thought to look. The only thing with that is I don't think they have greasable brackets.

Gettysburg150 10-10-2012 08:35 AM

Yeah I do not believe they are greasseable. BUTTTTT..... if you go to a hardware store and get the zerk fittings, you can just drill and tap them and BAM, greaseable

DarderSauce 10-10-2012 08:41 AM

Quote:

Originally Posted by Gettysburg150 (Post 4397116)
Yeah I do not believe they are greasseable. BUTTTTT..... if you go to a hardware store and get the zerk fittings, you can just drill and tap them and BAM, greaseable

.... touché sir

Gettysburg150 10-10-2012 08:45 AM

Sometimes we gotta be resourceful [scratch]

Hope that helps


All times are GMT -5. The time now is 08:05 PM.


http://www.focusfanatics.com/aboutus/copyright.asp