Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   General Technical Chat (http://www.focusfanatics.com/forum/forumdisplay.php?f=47)
-   -   Changing serpentine belt (http://www.focusfanatics.com/forum/showthread.php?t=297768)

focusauto01 09-16-2012 11:10 AM

Changing serpentine belt
 
On a 2002 Ford Focus SPI.

Any tips and tricks to changing? Mine is making a loud noise coming from the belton, sounds like it's a making a loud noise coming from the belt. I just bought the car a few months ago, with 120k. Not sure if it has ever been changed, so I want to go ahead and change it anyway.

BC_ZX3 09-16-2012 04:05 PM

Tensioners and idler pulleys are usually the main culprits for making noise if the noise isn't coming from the belt itself. You should change them along with the belt.
I'd make as belt routing diagram before you start (or take some digital pics.)

6SPD_soul 09-16-2012 04:28 PM

BC, I don't know where you get the self restraint to not correct him on the spelling issues. This one was a little worse than the usual "breaks".

whynotthinkwhynot 09-16-2012 05:27 PM

I'll fix that ---> serpentine.

I recommend Gates parts for both the tensioner and the belt. You'll want to draw out the pulleys and the belt so that you can put it back on correctly if there is not a schematic for the belt located under the hood.

To release tension from the tensioner, use a wrench or a socket if you can fit one on the bolt in the center of the tensioner pulley, and rotate the tensioner. I usually flip the belt off the crank pulley while holding tension off the tensioner.


All times are GMT -5. The time now is 08:10 AM.


http://www.focusfanatics.com/aboutus/copyright.asp