Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   ZETEC Performance (2000-2004) (http://www.focusfanatics.com/forum/forumdisplay.php?f=39)
-   -   Flange clamp sealer (http://www.focusfanatics.com/forum/showthread.php?t=297605)

xecutionr 09-13-2012 06:12 PM

Flange clamp sealer
 
I was just curious if anyone knew of a 3 or 4 point clamp that would bolt on around the current 2 point stock flange? Because where my flex pipe bolts into the straight pipe I have a leak an it's like I can't get my bolts tight enough to seal on the flange.. Anyone have an idea?


Sent from my Jailbroke iPhone via absinthe using Cracked Tapatalk app :)

mikebontoft 09-13-2012 06:21 PM

this is the section where a "cat back" exhaust would bolt to on the focus right? the end of the flex pipe?

have you tried putting a new gasket on it?

if it's the one where the cat bolts to, there's a donut in there that needs to be changed out if it leaks.

thingsidont 09-14-2012 04:12 AM

hey i got the same problem. (i think) my leak is from flex pipe to the straight pipe with a resonator. It has a new gasket and i tried to add gasket maker around it but with no results.


All times are GMT -5. The time now is 05:12 AM.


http://www.focusfanatics.com/aboutus/copyright.asp