how do i test wireing to maf for short to ground?
I need to know how to test the maf wireing for a short. What voltage should each individual wire have? I have a code for maf and have replaced the maf its self twice. the cel is still lit and car is still slow to pick up rpm till above 2000. I have cleared the code and within 6 miles cel is back on. Don't rember the actual code number off the top of my head but was for maf. Thanks for any help in advance!
You can check a short to ground with an ohm meter.
The wire that has the short, will be continuous with ground.
|All times are GMT -5. The time now is 03:18 AM.|