oil pan bung
Hey Tom, what is the thread size on your oil pan bung?
Also, I have an SVT and was wondering what I do with the valve cover breather hose that has been exposed after taking out the air box?
I have your turbo kit btw.
The fitting that I screw into my bung is a 1/2 npt to 5/8 barbed
Breather hose , I use a 1/2 inch hose and rought it down to the back of the engine away from the shifter to about 2 inches below the trans
also, i decided not to run a catch can (for now) and i have the CFM crankcase vent, where should i route the crankcase hose?
|All times are GMT -5. The time now is 04:44 AM.|