Ford Focus Forum, Ford Focus ST Forum

Ford Focus Forum, Ford Focus ST Forum (http://www.focusfanatics.com/forum/index.php)
-   Archive (http://www.focusfanatics.com/forum/forumdisplay.php?f=103)
-   -   For Sale: LCR Camber Plates (http://www.focusfanatics.com/forum/showthread.php?t=296351)

bumpnzx3 08-28-2012 01:12 PM

For Sale: LCR Camber Plates
 
Item Description: This is a used set of LCR camber plates. When I purchased them the bottom aluminum plate was a little bent from someone over-tightening the bolts. I used a plasma cutter and made new bottom plates out of 1/4" steel plate. I put a coat of black epoxy over the steel plate to keep it from rusting. The plates work perfectly and the bearings are in good shape.

Asking/Offering Price: $215 shipped

Email Address: bumpnzx3@hotmail.com

Your Location: In Illinois, near St. Louis, MO

Pics (if available):
http://img36.imageshack.us/img36/127...7447895842.jpg
http://img846.imageshack.us/img846/6...7447595842.jpg

bumpnzx3 08-30-2012 03:35 PM

My price was a little high. $215 shipped

mellephants 08-31-2012 12:13 PM

Those pictures look eerily familiar [;)] GLWS

http://farm7.staticflickr.com/6182/6...c699e48c_z.jpg http://farm7.staticflickr.com/6062/6...7aa469f4_z.jpg http://farm7.staticflickr.com/6190/6...36630bfe_z.jpg

bumpnzx3 08-31-2012 11:15 PM

Did I buy these from you originally?

mellephants 08-31-2012 11:34 PM

Quote:

Originally Posted by bumpnzx3 (Post 4330997)
Did I buy these from you originally?

Nope, you just have the same setup I do. [werd]

bumpnzx3 09-11-2012 05:30 PM

Couple of pictures showing the replacement steel plates I made for the bottom portion. http://img.tapatalk.com/d/12/09/12/upa9u7ys.jpghttp://img.tapatalk.com/d/12/09/12/y5uhydys.jpg

bumpnzx3 09-14-2012 10:01 AM

Payday bump!

ecugrad 10-05-2012 08:15 AM

Still available?

bumpnzx3 10-05-2012 08:18 AM

Sorry, updated my thread on FJ but forgot to do it on here. These are sold/shipped.

mushroom30 10-24-2012 02:48 PM

i have a 2004 ford focus zx3 with a lowering kit and there is a negative camber problem i was wondering if there was a kit for it and how would u do a alignment on it


All times are GMT -5. The time now is 10:10 PM.