Ford Focus Forum, Ford Focus ST Forum

Ford Focus Forum, Ford Focus ST Forum (http://www.focusfanatics.com/forum/index.php)
-   Archive (http://www.focusfanatics.com/forum/forumdisplay.php?f=103)
-   -   For Sale: Duratec 2.3L 88mm forged pistons (http://www.focusfanatics.com/forum/showthread.php?t=294552)

afraziaaaa 08-05-2012 06:16 PM

For Sale: Duratec 2.3L 88mm forged pistons
 
For sale is a brand new set of 88mm (.020" over) forged pistons. 11:1 compression. I am looking to get $350 OBO for these. PICS:

<a href="http://s460.photobucket.com/albums/qq326/afraziaaaa/?action=view&amp;current=IMG_5441.jpg" target="_blank"><img src="http://i460.photobucket.com/albums/qq326/afraziaaaa/IMG_5441.jpg" border="0" alt="Photobucket"></a>

<a href="http://s460.photobucket.com/albums/qq326/afraziaaaa/?action=view&amp;current=IMG_5440.jpg" target="_blank"><img src="http://i460.photobucket.com/albums/qq326/afraziaaaa/IMG_5440.jpg" border="0" alt="Photobucket"></a>

<a href="http://s460.photobucket.com/albums/qq326/afraziaaaa/?action=view&amp;current=IMG_5438.jpg" target="_blank"><img src="http://i460.photobucket.com/albums/qq326/afraziaaaa/IMG_5438.jpg" border="0" alt="Photobucket"></a>

<a href="http://s460.photobucket.com/albums/qq326/afraziaaaa/?action=view&amp;current=IMG_5436.jpg" target="_blank"><img src="http://i460.photobucket.com/albums/qq326/afraziaaaa/IMG_5436.jpg" border="0" alt="Photobucket"></a>

felixthecat 08-05-2012 06:44 PM

Those are awesome ^^^^^ Just asking, What happenned to your build up? & is this the 1st part you bought for your build?

afraziaaaa 08-05-2012 09:38 PM

Quote:

Originally Posted by felixthecat (Post 4293563)
Those are awesome ^^^^^ Just asking, What happenned to your build up? & is this the 1st part you bought for your build?

I couldn't bring myself to pull and replace a perfectly good engine on my focus. It wasn't the first part I bought, either. I have an entire short block ready to be put together. Crank, new bearings, ARP studs, eagle rods, gaskets, 39# cobra injectors, etc.

I am building a custom motorcycle. Trying to sell off some of these pieces to finance that.

afraziaaaa 08-07-2012 07:42 PM

bump

afraziaaaa 08-09-2012 01:52 PM

bump

afraziaaaa 08-11-2012 08:55 PM

bump

afraziaaaa 08-13-2012 11:32 PM

bump

afraziaaaa 08-21-2012 11:01 AM

bump

_Auricom_ 08-21-2012 11:58 AM

Answer me this, ...
[popcorn]
what kind of power gains or powerband can be had by installing these piston heads and raising the compression to 11:01 on the duratec block sir??

afraziaaaa 08-21-2012 03:08 PM

It really depends on what other mods go with these. Assuming everything else is stock, one can expect to gain a figure in the ballpark of 20HP at peak. Add a CAI, cams and a cat-back exhaust, then we might be getting up around 40HP.

I am not a tuner. If you really want an idea, take a look around the web for some duratec dyno charts for NA foci.

Thanks for the interest and the bump, but be aware that these pistons will not fit your SVT.


All times are GMT -5. The time now is 09:13 AM.


http://www.focusfanatics.com/aboutus/copyright.asp