Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   General Forced Induction (http://www.focusfanatics.com/forum/forumdisplay.php?f=44)
-   -   Sump (http://www.focusfanatics.com/forum/showthread.php?t=294393)

rics94svtbird 08-03-2012 11:06 AM

Sump
 
ok ive been looking ways to boost my foci and well ive chosen turbo. Then i remember i have to tap the oil pan and really dont want to do that in a way. then i remeber Dry Oil Sump feed but will it work with a turbo will it fit in the engine bay? Please someone help

Roushturboedzx3 08-03-2012 11:17 AM

It's not worth the risk. Just tap the pan it's cake to do

rics94svtbird 08-03-2012 01:12 PM

ok i will take that advice. also i would like to keep the engine cool as posible how can i achive this ive looked into things like:
http://www.mishimoto.com/ford-focus-...kit-02-04.html
these silicone hoses to handle that extra heat
http://www.designengineering.com/cat...-lr-technology
wrap the turbo heads and some exhaust parts to keep the engine bay temp down
http://www.designengineering.com/cat...er-sprayer-kit
http://www.designengineering.com/cat...yo2-air-intake
these to reduce intake temp
what do u think?

sporadic 08-03-2012 01:21 PM

Water/Methanol injection is cheaper than that CryO2 kit, but that is interesting.

1turbofocus 08-03-2012 04:36 PM

Takes about 1 Hr to remove the pan and replace it , about 15 for a good welder to put in the bung for a 1/2 npt to barbed 5/8 fitting

install a 180 deg thurmostat and lower the fans in a tune , wrap the downpipe and let her eat

Tom

rics94svtbird 08-05-2012 02:40 PM

O that's right we have the iron oil pan right. for a second there I thought it was aluminum oil pan like the tbird. I also have a another question. How strong is the detect crank shaft I was thinking of installing rods pistons and all of that good stuff but wondering how much boost will the foci crank hold while I save up for a stronger forged crank?

Roushturboedzx3 08-05-2012 04:06 PM

600whp safely

rics94svtbird 08-06-2012 05:37 PM

Quote:

Originally Posted by Roushturboedzx3 (Post 4293384)
600whp safely

ok so i can leave the stock crank and add forged pistons, forged conneting rods, rings, wrist pins, and clips. Also ive read that you really dont have to tear down the whole engine, that you can just remove the head and the oil pan install the pistons and rods all while the engine is in the car?[wrenchin]



ps im thinking if its possible boosting anywhere from 15-25 psi if possible and what type of whp will i be making

rics94svtbird 08-17-2012 12:03 AM

Quote:

Originally Posted by rics94svtbird (Post 4295066)
ok so i can leave the stock crank and add forged pistons, forged conneting rods, rings, wrist pins, and clips. Also ive read that you really dont have to tear down the whole engine, that you can just remove the head and the oil pan install the pistons and rods all while the engine is in the car?[wrenchin]



ps im thinking if its possible boosting anywhere from 15-25 psi if possible and what type of whp will i be making

Can someone help with this question thanks[wiggle][scratch]

1turbofocus 08-17-2012 09:14 AM

Like Roushturboed said he is running 600 , I made 723 but started braking cranks at anything over 650 , I broke 3 cranks

Tom


All times are GMT -5. The time now is 07:53 AM.


http://www.focusfanatics.com/aboutus/copyright.asp