New here and I did use the search function, but couldn't find answer
I have just put new rings and pistons in my sons 2000 Focus, (Valve seat dropped), new head etc
I am looking for the torque specs on the connecting rod bearing caps.
I have seen 28ftlb's + 90 degrees .......26ftlbs + 90 degrees.........12ftlbs + 60 degrees...and a couple more
Anybody have any idea what they should actually be, I did the 28ftlb + 90 degrees, but it seems overly tight
Thanks in advance
Ooops sorry wrong forum I guess!
Ford manual-38Nm or 28.5 Ftlb's.
The only torque spec. with additional turning are the head bolts.50Nm and two turns of 90 degrees.
|All times are GMT -5. The time now is 05:56 PM.|