Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   General Forced Induction (http://www.focusfanatics.com/forum/forumdisplay.php?f=44)
-   -   WMI Nozzle location before or after IAT? (http://www.focusfanatics.com/forum/showthread.php?t=290251)

Andrew T 06-13-2012 10:56 PM

WMI Nozzle location before or after IAT?
 
I know this is old issue
But I still need to know.
I know the Nozzle location should be after the blower.
And Ive relocated my Iat to intake manifold on back side.
Anyone knows where is exactly WMI nozzle will be locate?
Thanks alot!

Jgrove998 06-14-2012 06:09 AM

IIRC you would want the WMI before the IAT so that the ECU can adjust for the cooler charge temps. You are not going to tune for the WMI but the car should be able to tweak itself based on the charge temps.

Someone correct me if I'm wrong...

Edit: See Tom's post below

1turbofocus 06-14-2012 08:51 AM

I would put it after the IAT

Tom

Andrew T 06-14-2012 10:09 AM

Thanks you guys!!!
So It really confuse me again....
How different with before and after?
Btw,
Hello Tom
Ive upgraded SCT livelink 6.5 and try again by myself.But It still freeze like last time we did.

1turbofocus 06-14-2012 01:01 PM

Here is why I dont like the WM hitting the IAT sensor , the WM doesnt cool all the air to the temp that once the IAT gets wet shows the ECU it is at so a good bit of timing could be added back in but the air isnt actually as cool as the IAT shows , this could be an issue and cause an engine failure

Tom

Andrew T 06-14-2012 09:41 PM

What location recomendations?
 
Hi
I drawn by myself(sorry I'm not good at it)
Ive had relocation my IAT which is orange arrow.
So Where is best place is cooling air?
I only can figure out those 2 blue arrows to locate.
Many thanks!!!!
http://farm8.staticflickr.com/7099/7...394cfcb0_b.jpg

Jgrove998 06-15-2012 06:26 AM

Quote:

Originally Posted by 1turbofocus (Post 4214440)
Here is why I dont like the WM hitting the IAT sensor , the WM doesnt cool all the air to the temp that once the IAT gets wet shows the ECU it is at so a good bit of timing could be added back in but the air isnt actually as cool as the IAT shows , this could be an issue and cause an engine failure

Tom

Thanks for the correction Tom [thumb]


All times are GMT -5. The time now is 03:17 PM.


http://www.focusfanatics.com/aboutus/copyright.asp