Focus Fanatics

Focus Fanatics (
-   DURATEC Ti-VCT Performance (2012-Current) (
-   -   Engine Mount (

SteedaBrandon 05-16-2012 09:48 AM

Gauging Interest: Steeda Engine Mount for 2012 Focus
Please reply to this thread and express your interest if you would like us to manufacture an engine mount for the Focus.

amoosenamedhank 05-16-2012 09:52 AM

Well now that people have realized that it's the same mount as the MS3 this could be a tough market... however people do typically prefer something that was "made for their application".

There are also a few pictures of the stock mount floating around now.... and it's more than obvious that needs to be addressed. Should be on everyone's short list IMO.

kylesvt720 05-16-2012 09:56 AM

Whether I end up with an ST or a regular 2012/13. I'd definitely be interested. How about that G trac brace sold as a stand alone item?

Brabs_Weather 05-16-2012 10:35 AM

I would be interested in the rear engine mount, but really interested in the Steeda G-Trac Front end Brace installed on the Steeda 001 FF.

Bimmer-Bob 05-16-2012 11:05 AM

What's wrong with the stock engine mounts?

darkangelism 05-16-2012 11:09 AM


Originally Posted by Bimmer-Bob (Post 4168057)
What's wrong with the stock engine mounts?


Originally Posted by zx3matt (Post 4166816)
Okay, I was looking for a mount that would allow the engine and transmission to feel more connected while still being refined. I also wanted options...

Soooo... I replaced the stock mount with a take-off MS3 mount that will allow me the option of installing poly inserts later. The results are excellent.

MS3 mount...

Stock mount... (almost totally rubber!)

_RED_ 05-16-2012 11:10 AM

Count me in

darkangelism 05-16-2012 11:11 AM

I would be interested, and the front end brace and a front sway bar

Sonic_HedgeHog 05-16-2012 11:14 AM


Originally Posted by darkangelism (Post 4168066)
I would be interested, and the front end brace and a front sway bar

^^^this x1billion

Bimmer-Bob 05-16-2012 11:18 AM


Originally Posted by darkangelism (Post 4168064)

Well, I understand the concept of going for stiffer engine and transmission mounts in general, but I mean is there something specifically wrong with the stock mount? Like has it been prone to failure or anything? Because IMO, softer rubber mounts are more than appropriate for a FWD economy car of modest power output that only sees street use.

All times are GMT -5. The time now is 01:58 PM.