Ford Focus Forum, Ford Focus ST Forum

Ford Focus Forum, Ford Focus ST Forum (http://www.focusfanatics.com/forum/index.php)
-   DURATEC Ti-VCT Performance (2012-Current) (http://www.focusfanatics.com/forum/forumdisplay.php?f=101)
-   -   New Exhaust Tip Is In! (http://www.focusfanatics.com/forum/showthread.php?t=287573)

bassmobile 05-11-2012 07:32 PM

New Exhaust Tip Is In!
 
I spoke about this in another thread, but thought it would be worth a new one! Just got in my new tip I ordered from eBay. Here is the link:

eBay Link

Ships out of China and seems fairly well made. Mounts real easy. And looks 100% better than that bare piece of pipe! See for yourself...

http://www.kaproductions.com/gear/ford/tip_01.jpg
http://www.kaproductions.com/gear/ford/tip_02.jpg
http://www.kaproductions.com/gear/ford/tip_03.jpg
http://www.kaproductions.com/gear/ford/tip_04.jpg
http://www.kaproductions.com/gear/ford/tip_05.jpg

iPhone photos....

RedfocusTL21 05-11-2012 07:36 PM

Looks good I almost ordered the same one off of eBay but did know how it would look mounted up but after seeing it on your car I may have to go back and order it

LimeyYankee 05-11-2012 07:41 PM

Looks good! Thanks for the pics!!!

Tayrez 05-11-2012 07:44 PM

Looks good !

dyn085 05-11-2012 07:47 PM

That tip finishes off the rear a lot better than the stock little exhaust downturn.

I was actually kind of surprised that Ford didn't offer something similar as an accessory. I can understand the lower trims, but it is pretty silly that they couldn't dress up the Ti exhaust.

jvillareal78 05-11-2012 08:27 PM

I know you said you posted this in another thread but do you have a link from where you bought it?

bassmobile 05-11-2012 08:32 PM

Quote:

Originally Posted by jvillareal78 (Post 4160081)
I know you said you posted this in another thread but do you have a link from where you bought it?

Ah grasshopper, you didn't read my post all the way! [:D]

The link is before the photos, says "eBay Link"

TitaniumGero 05-11-2012 09:11 PM

Looks great! If I do order that, I think I would have to cut out the bolts a bit. It sticks out too much.

bassmobile 05-11-2012 09:51 PM

Quote:

Originally Posted by TitaniumGero (Post 4160120)
Looks great! If I do order that, I think I would have to cut out the bolts a bit. It sticks out too much.

Those are actually threaded studs. You tighten them down first with a hex driver than tighten down the nuts over the stud to lock it into place.

cacophonous 05-11-2012 10:50 PM

Aren't you supposed to cut the thread studs flush after you bolt it down?


All times are GMT -5. The time now is 09:44 PM.