Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   General Forced Induction (http://www.focusfanatics.com/forum/forumdisplay.php?f=44)
-   -   intercooler size question (2nd gen duratec) (http://www.focusfanatics.com/forum/showthread.php?t=287367)

d-coupe 05-09-2012 02:51 PM

intercooler size question (2nd gen duratec)
 
I want to start piecing together parts for my DIY turbo build. I was wondering what size intercooler are most of the 2nd gens running? I'm thinking 28" x 7" x2.5" with 2.5" inlets will be a good size. will it fit between the crash bar and lowest part of the front bumper? I'm going to use the K&N fipk for the maf tube and a 2.5" inch bov+rs knockoff bov and generic 2.5" inch intercooler pipes for the pieces in between.

koke'sfocus 05-09-2012 06:52 PM

yeah its gonna fit and about the bov u should at least get known brands for bov, wg, and turbo just my opinion, for everything else is ok like the ic those ebay ones r ok

d-coupe 05-09-2012 07:34 PM

ive ran 2 greddy knock off bovs in my hondas before for years..so Its fine. I do agree on running a good turbo though.

1turbofocus 05-09-2012 10:14 PM

The RS greddy knock off have worked well for me as well for years

Tom

d-coupe 05-19-2012 02:35 PM

is a 2.5" maf tube big enough for low boost <10psi?


All times are GMT -5. The time now is 09:25 AM.


http://www.focusfanatics.com/aboutus/copyright.asp