Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   Massive Speed (http://www.focusfanatics.com/forum/forumdisplay.php?f=102)
-   -   !!!New Product - Massive Speed custom camshafts for 2008+ Focus 2.0 Duratec!!! (http://www.focusfanatics.com/forum/showthread.php?t=283537)

K Dog 03-29-2012 10:00 AM

!!!New Product - Massive Speed custom camshafts for 2008+ Focus 2.0 Duratec!!!
 
More power for the late model 2008-2011 Focus!!! These are THE ONLY cams available for this car!

Massive has modified Crower's outstanding range of high performance camhsafts for the 2003-07 Duratec, manufactured and installed a duplicated shutter wheel for the unique 08+ cam position sensor.

Crower has been in the cam grinding business for 50+ years and produces some of the finest available valve train components.

4 grinds are currently available for this application:

Performance level - Stage 1 - Street use with emphasis on bottom end and mid range power. Works with stock springs up to factory rev limiter.
INT/EXH - Dur @ .050 Lift: 220/214 RR: 1/1 Gross Lift: .374/.363 LSA: 114 RPM: Idle to 7000 Redline: 7500

Performance level - Stage 2T - Forced Induction - Designed specifically for turbo or supercharger applications. Low duration, high lift profile. Requires Crower spring kit #84170.
INT/EXH - Dur @ .050 Lift: 220/220 RR: 1/1 Gross Lift: .400/.400 LSA: 112 RPM: Idle to 8000 Redline: 8500

Performance level - Stage 2 - 3/4 Race - Designed for street/strip applications in normally aspirated engines. Requires spring/retainer kit #84170.
INT/EXH - Dur @ .050 Lift: 228/220 RR: 1/1 Gross Lift: .389/.373 LSA: 112 RPM: 1000 to 7800 Redline: 8300

Performance level - Stage 3 - Full Race - Drag Race and radical Street/Strip. Requires #84170 spring kit and compatible ECU upgrade for optimum results. Rough idle.
INT/EXH - Dur @ .050 Lift: 236/228 RR: 1/1 Gross Lift: .414/.393 LSA: 112 RPM: 1100 to 8000 Redline: 8500

http://www.zeebone.com/gallery/d/957...RATEC+CAMS.jpg
Just $449.17!!! We have a few sets in stock ready to ship! As with any camshaft install, ECU tuning is highly recommended post install.

Find them Here

VenomRogue 03-29-2012 10:11 AM

bah.



no zetec, no care [neener]




love you, Karl... lol.

GO.army.1969 03-29-2012 11:44 AM

Looks like I need to start putting money in my mod bank again. Its never over is it lol

focusZX505 03-29-2012 05:23 PM

Most tuners with call this custom tuning as well since no one has put cams in dbw iirc
Posted via FF Mobile

focusZX505 03-29-2012 05:27 PM

Saying that I wish I had the money for the cams and the tuning karl or id be there tomorrow to pick up a set
Posted via FF Mobile

K Dog 03-30-2012 08:18 AM

It would be the same basic tune as on a 05-07 2.0. But personally I would always get a custom dyno tune.

PSUrivie 03-30-2012 01:27 PM

It's pretty sweet to see this product get released!!

GO.army.1969 03-30-2012 02:00 PM

Quote:

Originally Posted by PSUrivie (Post 4084447)
It's pretty sweet to see this product get released!!

Thank you for getting this rolling.

SlateTheGreat 04-09-2012 10:06 PM

Definitely on my motor mod list

J-Town_2006ZX3 04-23-2012 08:58 PM

Kdog, where does massive get their steel for these camshafts? I assume they are an alloy grade. SAE 51xx?
Posted via FF Mobile


All times are GMT -5. The time now is 07:44 PM.


http://www.focusfanatics.com/aboutus/copyright.asp