Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   ZETEC Performance (2000-2004) (http://www.focusfanatics.com/forum/forumdisplay.php?f=39)
-   -   Exedy Lightened steel Flywheel Help (http://www.focusfanatics.com/forum/showthread.php?t=283036)

Steve Shaw 03-23-2012 04:45 PM

Exedy Lightened steel Flywheel Help
 
Hi Guys,

I am installing a ZF502 Lightened Flywheel on my Zetec Engined Focus.

I feel that I need to somehow line up the Crank Position Sensor?

However the Flywheel can be installed in multiple positions.

Anyone have any advice?

Thanks,

Steve

1turbofocus 03-23-2012 05:39 PM

It looks like it can be installed at any bolt hole placement but it cannot , if you look close there is only 1 spot that you can get all the Fly Whl bolts in

Tom

Steve Shaw 03-23-2012 08:34 PM

Thanks Tom,

I did eventually realize that ... I put the old Flywheel on and as you say, it will only fit one way .... I still have a problem with the new one though ... it won't fit even after trying all the possible variations .... looks like I have a problem with the new Flywheel ..[mecry]

Also, How does the Crank Sensor work with the new Flywheel ... it is much further from it... and I could shim it, but there does not appear to be any 'Trigger' to activate it..[???:)]

Thanks for any help!!

1turbofocus 03-24-2012 10:49 AM

Distance should be the same as stock or your going to have trouble

Tom

iminhell 03-24-2012 02:59 PM

The ZF502 comes up as the flywheel for a 2.3 duratec, which there should be no issues with Crank Position alignment as the CKP is on the crank pulley with those engines.
Which to me says either this isn't on the car in you profile or you have the wrong year and engine, which would be a zetec (which has a CKP in the position you're describing).

I'm going to go with 'it's the wrong part for the application'.

Steve Shaw 03-24-2012 03:37 PM

Thanks Guys ... problem was that I ordered a ZF502, which is for my 2004 Zetec Engine Focus ZX5 , but I received a Box Labeled ZF502 ..... with a ZF501 inside..!![scratch][scratch]

Anyways ... returning it for the correct Part ... hopefully all will be good ...

Thanks for the Help !! [ffrocks]

Steve

Eastwood 11-14-2012 11:46 PM

I know I bring up a dinosaur post from the pas but there is no exedy zetec steel flywheels .. suuuuuuuxxxxxx


All times are GMT -5. The time now is 08:37 PM.


http://www.focusfanatics.com/aboutus/copyright.asp