Ford Focus Forum, Ford Focus ST Forum

Ford Focus Forum, Ford Focus ST Forum (http://www.focusfanatics.com/forum/index.php)
-   Massive Speed (http://www.focusfanatics.com/forum/forumdisplay.php?f=102)
-   -   !!!New Product - Massive Precision GM LS Series Crank Bolt!!! (http://www.focusfanatics.com/forum/showthread.php?t=282854)

K Dog 03-21-2012 06:37 PM

!!!New Product - Massive Precision GM LS Series Crank Bolt!!!
 
http://www.zeebone.com/gallery/d/956...+Bolt+v1_3.jpg

Truly superior strength is needed on this most critical of load bearing fasteners. The crankshaft sees immense kinetic energy! Both twisting and lateral loads are exerted on this one area, and to an even greater degree on belt driven supercharged cars. OEM fasteners are one-time-use - they stretch and must be replaced, so upgrading with the Massive Speed Precision unit is a "no-brainer". Grade 12.9 197,000 PSI tensile strength 12 point flanged bolt finished in black oxide is far stronger and places superior clamp only load to balancer through the use of a seperate washer plate (a full 1/4" thick!) versus the 1 piece stocker. Fully reusable. MADE IN THE USA!!!

Just $24.57. Still $5 shipping to the lower 48 states.

Find it Here


YES - this will work on your LS1 equipped Focus... ;)

Magus2727 03-22-2012 01:05 PM

So to make sure when I put in my 2001 ZX3 focus as my vehicle and I get this:
"This Part Will NOT Fit Your 2001 FORD FOCUS ZX3 4Cyl 2.0L" in red above the part image I ignore that as it will fit the Zetec motor anyway? :-)

SonicZXIII 03-22-2012 05:33 PM

Quote:

Originally Posted by Magus2727 (Post 4071767)
So to make sure when I put in my 2001 ZX3 focus as my vehicle and I get this:
"This Part Will NOT Fit Your 2001 FORD FOCUS ZX3 4Cyl 2.0L" in red above the part image I ignore that as it will fit the Zetec motor anyway? :-)

YES - this will work on your LS1 equipped Focus... ;) its a GM motor bolt

Magus2727 03-22-2012 06:00 PM

But what about my LS7 focus? Guess don't see why they would post a new product that 99% of the people can't even use....

SonicZXIII 03-22-2012 06:04 PM

Quote:

Originally Posted by Magus2727 (Post 4072170)
But what about my LS7 focus? Guess don't see why they would post a new product that 99% of the people can't even use....

well for those select few with ls1's here ya go all others are bust

K Dog 03-26-2012 12:25 PM

Plenty of people on here own more than one car or truck. Any time you do a cam on an LS the crank bolt has to come off, so this is a pretty commonly requested item.

And hey, we support this site, so I like to let anyone and everyone know what we've got! :)

A little birdy told me there might just be a zetec crank bolt coming down the pipeline as well!

bespurcell 03-26-2012 05:41 PM

Quote:

Originally Posted by Magus2727 (Post 4071767)
So to make sure when I put in my 2001 ZX3 focus as my vehicle and I get this:
"This Part Will NOT Fit Your 2001 FORD FOCUS ZX3 4Cyl 2.0L" in red above the part image I ignore that as it will fit the Zetec motor anyway? :-)

There is a LS1 equipped Focus on this site and as was stated most people own more than 1 car. The LS1 is one of the most common engines used in builds.

K Dog 03-27-2012 10:30 AM

TurboTurtle would agree!


All times are GMT -5. The time now is 11:01 AM.