Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (http://www.focusfanatics.com/forum/index.php)
-   Central Florida Motorsports (http://www.focusfanatics.com/forum/forumdisplay.php?f=82)
-   -   Identification help? (http://www.focusfanatics.com/forum/showthread.php?t=281172)

Djzx3 03-02-2012 06:46 PM

Identification help?
 
Hey just got my 12 piece prothane bushing kit in the mail from you guys today, even just got done writing a good review about it.

But I need a little help on which is which? I took a pic, the ones at the bottom are the smallest, then the next one's up are a little bigger, then I got two short and fat one's, and two long and somewhat skinny ones at the top.
http://i744.photobucket.com/albums/x...bushing001.jpg
Could you tell me which is which? The paper that comes with it gives you numbers and names, but there are no numbers on the bushings themselves.

Thanks guys, great product.

Djzx3 03-02-2012 07:17 PM

Okay, well I'm pretty sure the short and fat one's are for the lower control arm that the spring sits on, along with the long skinny two at the top of the page?

Am I right?

Djzx3 03-06-2012 03:32 AM

Bump, I just need to know, are the smallest ones for the toe or camber arm?

cfmfocus2 03-06-2012 11:05 AM

It has been awhile since I looked at one of these kits myself, so I cannot remember off hand. Once you remove the factory bushing you will be able to tell which one will fit.

Djzx3 03-06-2012 02:50 PM

Okay, I was just wondering which went to which before I went into it, but it should be easy enough to tell when I get into it.

I bet the smaller ones are for the toe arms, from the looks of it.


All times are GMT -5. The time now is 01:23 AM.