Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   MK3 Focus (http://www.focusfanatics.com/forum/forumdisplay.php?f=121)
-   -   Fog light bezal (http://www.focusfanatics.com/forum/showthread.php?t=272967)

Ghost71 11-14-2011 05:37 PM

Fog light bezal
 
Can the chrome bezal be removed without taking the fogs out?

Twenty 11-14-2011 06:18 PM

It supposedly can, but it's much easier to have the extra room with the fog lights out of the way.

Mik Ohki 11-14-2011 06:43 PM

I love the chrome on the Fog Lights, but hate the chrome trim under the windows on the SEL & Titanium.

You could always black it out with vinyl or something similar if you wanted. A few people have done that, or replaced them with the Fog Light mounts from the higher trims.

Ghost71 11-14-2011 07:17 PM

I tried to Pop Off the trim, they won't budge.

Nutty 5.0 11-15-2011 07:52 AM

Yes, but do a search as myself and others have done this. They can be removed but best to take out the fog lamp as the clips are helped to hang on by the fog lamp. When you take them out you'll see what I mean.

Twenty 11-15-2011 12:11 PM

Here are some pictures from when I took mine out, hopefully they can be of some help.

http://www.focusfanatics.com/forum/s...9&postcount=19

If you work from behind, you can use something like a small flathead screwdriver to one-by-one release the tabs holding them in place.

BooBerry 11-15-2011 01:25 PM

Just take out the fog lights. It makes everything alot easier. The only issue is limited space but you can do it by hand.

DaeHanL 11-15-2011 02:31 PM

Quote:

Originally Posted by Twenty (Post 3895606)
Here are some pictures from when I took mine out, hopefully they can be of some help.

http://www.focusfanatics.com/forum/s...9&postcount=19

If you work from behind, you can use something like a small flathead screwdriver to one-by-one release the tabs holding them in place.

so all in all, takes about what 30 min to remove and replace? minus painting of course.

Twenty 11-15-2011 03:05 PM

I didn't keep track of time when I did it, but it took me maybe an hour?

Now, that includes stopping for pictures, taking notes, and fighting with one bezel.

One bezel was being stubborn and took probably 20 minutes to pop out. The other, took seconds. I don't know why it was putting up such a fight but it did.

Provided the bezels don't fight back like mine did, 30 minutes should be enough or even more than enough time.

STL 314 11-15-2011 03:28 PM

I could be wrong, but aren't the fog light housings different on the Ti compared to the rest of them? Yes, I know they are black, but the non-Ti's don't have the chrome ring (bezel) do they? I thought non-Ti fog light housings were one piece total, instead of a housing with a separate bezel at the end (Ti).

Anyway, I was bored and took one of my bezel's off with a credit card. That's the only piece I'll be painting so I won't be removing the whole fog light assembly itself.


All times are GMT -5. The time now is 04:02 AM.


http://www.focusfanatics.com/aboutus/copyright.asp