Focus Fanatics

Focus Fanatics (
-   MK1 Focus (
-   -   Change wiring - DRL is at 100% (

ravens 11-08-2011 07:10 PM

Change wiring - DRL is at 100%
Hi all,

I have a 2002 Focus SE that I bought while I was in the US. When I moved to Canada, I asked the dealer to add DRL as it is a requirement in Canada.

I later realized that the dealer made the following changes :
1) The low beam is being used as DRL
2) The light is always switched on at 100%, as I do not see any difference in the intensity even when I turn the switch from Off to "LIGHTS" position

I want to remove this wiring, so that I can use the Parking lights for DRL.

Any help would be greatly appreciated.


BumbleBlackBee 11-08-2011 07:51 PM

I don't know if this will help, but check this out maybe there is information that will help you understand what to do.

thenorm 11-08-2011 08:56 PM

DRL's were always really close to full strength low beams, i would guess %90 of the intensity

Nevin W 02-04-2013 02:14 AM

Revive of old thread, I have this same issue. The car came from the states do there is no wiring to the R12 Relay. Any ideas?

All times are GMT -5. The time now is 01:57 PM.