Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   Archive (http://www.focusfanatics.com/forum/forumdisplay.php?f=103)
-   -   NEW! CFM Front Lower Brace 2000-2010 Focus including SVT! (http://www.focusfanatics.com/forum/showthread.php?t=258227)

cfmfocus2 05-16-2011 09:25 AM

NEW! CFM Front Lower Brace 2000-2010 Focus including SVT!
 
CFM Front Lower 4 Point Brace 2000-2010 Focus including SVT!

http://focus.c-f-m.com/images/produc...rstressbar.jpg

CFM Front Lower 2 Point Brace 2000-2010 Focus including SVT!

http://focus.c-f-m.com/images/produc...essbar2pnt.jpg



The CFM Front Lower Brace is offers in two fitment options. The standard fitment is design to work on the Ford Focus 00-10 excluding the Ford Focus SVT.

The lower fitment is design to work on the Focus SVT with the offroad pipe, factory converter, and high flow cat pipe(modification to heat shield maybe required). Please note the lower fitment brace has less ground clearance.

Paladin 05-16-2011 08:07 PM

The standard fitment will clear my 2.5 inch svt orp right? If so I'm ordering this weekend!

cfmfocus2 05-17-2011 08:40 AM

Quote:

Originally Posted by Paladin (Post 3673235)
The standard fitment will clear my 2.5 inch svt orp right? If so I'm ordering this weekend!

Unfortunately it will not. The lower fitment bar would be required.

edingeek 05-17-2011 08:59 AM

Either fit with a full 3" setup? 3" ORP, 3" flex, 3" back exhaust?

cfmfocus2 05-17-2011 09:47 AM

The lower fitment would be required for the 3 inch offroad pipe for the svtf.

ktwelsch 05-17-2011 03:10 PM

What is the ground clearance looking like for a SVT with stock cat? Will I drag on everything? :)

edingeek 05-17-2011 04:41 PM

Quote:

Originally Posted by cfmfocus2 (Post 3673864)
We did not test the fitment with a 3" offroad. The standard fitment one should work but can't guarantee it won't hit under acceleration, which means you might need the lower fitment one.

Hmmm.. Wonder how much ground clearance there would be on an SVT with the H&R sport cup kit and the lower fitment setup.

Paladin 05-18-2011 02:56 AM

^^ probably not too much. you could get hung up. or drag it everywhere.

cfmfocus2 05-18-2011 06:21 PM

I will see if I can find out tomorrow the ground clearance for the lower fitment bar.

edingeek 05-18-2011 08:06 PM

Quote:

Originally Posted by cfmfocus2 (Post 3675672)
I will see if I can find out tomorrow the ground clearance for the lower fitment bar.

2 measurements would be awesome.. 3" ORP with normal fit and lower fit on lowered car ;-)


All times are GMT -5. The time now is 02:23 AM.


http://www.focusfanatics.com/aboutus/copyright.asp