Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   General Forced Induction (http://www.focusfanatics.com/forum/forumdisplay.php?f=44)
-   -   Aeromotive Stealth 340 in-tank fuel pump (http://www.focusfanatics.com/forum/showthread.php?t=255754)

inis 04-15-2011 06:39 PM

Aeromotive Stealth 340 in-tank fuel pump
 
I couldn't find any threads on this already, anyone else have one?

I just got mine in, I waited nearly 3 months for it!

http://kctuners.org/forum/uploads/12...91_1213303.jpg

http://kctuners.org/forum/uploads/12..._91_460734.jpg

http://kctuners.org/forum/uploads/12...91_1655966.jpg

http://kctuners.org/forum/uploads/12...91_1259691.jpg

If weather permits, I'll be installing it tomorrow.

Heres a thread we have going on teamzx2 about it:
http://teamzx2.com/threads/29497-Alt...884#post508884

and here's the reason I need it:

http://teamzx2.com/threads/2244-My-t...h-pump-came-in

Car is running good, I did however get a misfire a week or two ago and have yet to resolve it. Otherwise it ran great before that.

Roushturboedzx3 04-15-2011 09:06 PM

Make sure you know that you can't use a normal walbro electrical plug cause the aeromotive pos and neg are opposite of the walbro

inis 04-15-2011 09:17 PM

Quote:

Originally Posted by Roushturboedzx3 (Post 3636090)
Make sure you know that you can't use a normal walbro electrical plug cause the aeromotive pos and neg are opposite of the walbro

Ya I noticed that , I'll have to wire in the pigtail anyways because its different then whats under the zx2's cannister lid. I think I'm just going to leave the stock clip there and drill a 1/4" hole through the lid and use the grammet in one of the pictures to feed the wire through. I picked that up on the way home today.

Roushturboedzx3 04-15-2011 09:26 PM

Yea drilling and the grommet will work just fine. Did kinda the same on mine

Rudel 04-15-2011 09:33 PM

Nice, cant wait to get mine in...

03OrangeSVT 04-16-2011 06:33 AM

One thing for sure is the quality of the Aeromotive pump should be absolutely top notch.

sleepyboy 04-16-2011 07:12 AM

Well it looks beautiful, too bad you'll never see it, and the other parts in the links wowsers, me likey!!

1turbofocus 04-17-2011 03:11 PM

Keep in mind that the ZX2 is much like the ZX3 in that you do have a return system but it is built into the cannister and returns back into the cannister 25-40% of the fuel that the pump puts out , this is done so when the fuel is low and you take off or turn corners you have fuel trapped in the cannister till fuel comes back around the cannister

With the early testing I did on my car when I took the stock pump that was falling to 28psi at 400HP and put it direct with no cannister the fuel psi held to 65psi at 7000 the cannister is a lot of the issue

Tom

SlimShady 04-17-2011 03:56 PM

Are these a good replacement for the pump?

bmylez 04-17-2011 04:04 PM

Good replacement but only if you want to make monster power. These will support probably 800whp.


All times are GMT -5. The time now is 04:12 PM.


http://www.focusfanatics.com/aboutus/copyright.asp