Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   Ford Focus Builds & General Showroom (http://www.focusfanatics.com/forum/forumdisplay.php?f=43)
-   -   Focus RS Build.....For the Occasional Track Day! (http://www.focusfanatics.com/forum/showthread.php?t=248072)

thielt1 01-10-2011 11:50 AM

Focus RS Build.....For the Occasional Track Day!
 
Since I am finally tearing my car down after collecting RS bits since early 2009 I decided I would start the build Thread.

I will be going from here:
http://i1007.photobucket.com/albums/...1/DSC_0002.jpg

http://i1007.photobucket.com/albums/...1/DSC_0001.jpg

To Here:
http://i1007.photobucket.com/albums/...us_RS_rear.jpg

http://i1007.photobucket.com/albums/...s_RS_front.jpg

thielt1 01-10-2011 12:11 PM

Build Plans:

OEM RS Parts
-Focus RS Build All Exterior OEM Parts
-RS Engine
-RS Gearbox
-RS Suspension
-RS Gauges

Non OEM
-Team Dynamics Pro 1.2 Anthracite 18x8
-Sachs RS OEM Shocks with Vogtland Springs (Will eventually be running GAZ Coilover Setup)
-Eibach Swaybars
-Full Prothane Kit
-Autopower roll bar
-Hella Mach HID
-Carbon Fiber Hood Painted
-FIA Approved Seats (OMP WRC, Sparco Corsa, Cobra Suzka Pro)
-Airbag Delete and OMP Superquadro wheel
-Shortened Borla Exhaust
-Carbon Front Lip

ChuckDee 01-10-2011 12:15 PM

these type of builds tend to get really costly, so i hope to see this completed! so what have you collected so far?

thielt1 01-10-2011 12:16 PM

Door Cards
 
Instead of importing the RS door cards I decided to build them.

Stencil
http://i1007.photobucket.com/albums/.../panel-8-1.jpg

Clamp to hold foam tight for even expansion
http://i1007.photobucket.com/albums/.../panel-5-1.jpg

Glued and Pinned
http://i1007.photobucket.com/albums/...t1/panel-3.jpg

Fitted
http://i1007.photobucket.com/albums/.../panel-6-1.jpg

thielt1 01-10-2011 12:21 PM

Quote:

Originally Posted by ChuckDee (Post 3517016)
these type of builds tend to get really costly, so i hope to see this completed! so what have you collected so far?

As far as RS parts go everything but:
-rear quarter mouldings
-Brand New RS Grill (have a perfect rs collection grill and an oem rs grill in need of repair)
-RS Center Console if I decide to use it.

I might be forgetting a small piece or two but for the most part I have everything.

This Project will be completed, I thought long and hard about the late 80's vintage 911 I could have by the time this thing is done. But if I don't build one now chances are the opportunity to own one will be gone.

Hal3st0rm 01-10-2011 01:21 PM

Subscribed! Can't wait to see it completed!

HilloNative 01-10-2011 01:27 PM

man, if you want to focus RS turbo, i have most of the parts, i have been(like you) getting RS bits for the past 3 years, manly turbo and some other parts, i also have the brembo RS calipers. Pm for some pictures or some info if you are interested.

save_HUTCH 01-10-2011 01:28 PM

Vary nice. I cant wait to see the end product.

thielt1 01-10-2011 03:40 PM

The only RS Parts I am interested in are the ones I mentioned above. I already have the brembo calipers and I am going with topspeed for the turbo. Thanks though.

Here is a link to some people who might be interested in your parts -
http://forums.focaljet.com/exterior-...iscussion.html

warneej 01-10-2011 04:01 PM

Wow! So you have all of that??? I'm very impressed and quite excited to see this through!

Hope all goes well!


All times are GMT -5. The time now is 12:28 AM.


http://www.focusfanatics.com/aboutus/copyright.asp