Ford Focus Forum, Ford Focus ST Forum

Ford Focus Forum, Ford Focus ST Forum (http://www.focusfanatics.com/forum/index.php)
-   General Forced Induction (http://www.focusfanatics.com/forum/forumdisplay.php?f=44)
-   -   Powerworks (PWSC) service/replacement parts info (http://www.focusfanatics.com/forum/showthread.php?t=243298)

volcomstone1966 10-29-2010 01:35 AM

Powerworks (PWSC) service/replacement parts info
 
ok well after puting a powerworks kit on my svt and using the "search"
alot and some emails and some phone calls , i put together a little list of
service/replacement parts


------------------------------------------------------------------


Powerworks belt tensioner
This is the complete interchange cross referance for the tensioner

GATES 38112 ( i have used this one )

CARQUEST 89240
DAYCO PRIVATE LABEL 305240
DYNAFLEX by DAYCO 305240
EAGLEMOTIVE 305212
GOODYEAR 49212
KOOLKLUTCH 180240
MARK IV AUTOMOTIVE 305212
NAPA 38112
MIGHTY 305240
ORIGINAL EQUIPMENT DATA 21000684
ORIGINAL ........................... 21 006508
ORIGINAL ........................... 2 1007465
PARTS MASTER/DAYCO 89240
PROLIANCE READY-AIRE 1989
VISTEON 800110
(info from FF)


Powerworks belt size
6-rib replacement
00-02 5spd/AUTO and SVT = 87.5” long, ’
03-04 5spd/AUTO = 86.5” long

dont really need part number just go to a auto
parts store and tell them the size you need
(info from Powerworks)



Oil filter relocation:

Parts were made by Perma-cool but don’t make them no more..
Derale performance makes parts that are just the same
( can be found on Jegs.com )

Spin on block part. Derale #259-15746 Spin-On Adapter • Dual 1/2" NPT Side Ports • Engine Thread Size:3/4"-16

Filter mount Derale #259-25709 Single Oil Filter Mount • Side Ports • 1/2'' NPT Ports • Filter Threads:3/4'' – 16
(info from kwk vs66)



Intercooler pump (same as SVT lightning)
Ford Racing Intercooler Pump M-8501-L54
(info from FF)


Idler pulley
Gates 70 mm idler 38018
dayco idler pulley 89033

i have the right part number in my tool box
i need to put it up here
------------------------------------------------------------------
PDFs

PW C.A.R.B. infoCARB EO: D-587

http://arb.ca.gov/msprog/aftermkt/devices/eo/D-587.pdf
(thanks to shlbygt)


PW directions

http://www.webtrendsguy.com/focus/fo..._man_v2-04.pdf
(thanks to focus311)



---------------------------------------------------------------
hope this might save some people some time if it can be added to the Stickied Threads



..

norcalfocus01 10-29-2010 11:34 PM

Nice write up Kyle. I'm going to add this as a sticky.

CarDemon 10-30-2010 06:15 PM

Very nice. I wish we had a similar resource for JRSC parts.

focus311 11-08-2010 08:47 PM

My link to the Powerworks manual works

http://www.webtrendsguy.com/focus/fo..._man_v2-04.pdf

volcomstone1966 11-08-2010 09:03 PM

Quote:

Originally Posted by focus311 (Post 3459382)
My link to the Powerworks manual works

http://www.webtrendsguy.com/focus/fo..._man_v2-04.pdf

thanks i dont know why mine did not work


can a mod fix that ?

volcomstone1966 06-02-2011 02:00 AM

well it will not let me add info to the firts post:

im sure most know but some might not

the IAT
is from a ford lightning
The Motorcraft number is DY-754
(Ford number F6SZ-12A697-A)
OLD PART NUMBER


new part is
DY-1159 (motorcraft)
or 9C1Z-12A697-B (ford)

goldfoci 03-21-2012 09:59 AM

where can i find the cable that connect to the iat .. i cant find this cable ..

Tyler T 01-01-2013 11:01 PM

Thanks for the helpful thread!

volcomstone1966 11-18-2013 03:09 PM

bypass valve info
 
full Bypass Assembly Kit which includes a new nose, coupler and the oil to fill it, the part number is 10-62-44-003-BL. They are machined to order and run $1200.

the actuator is $40.50. The part number for the actuator is 45-01-41-112 (original part number#VA783)
You will also need the actuator hardware which is part number 45-00-04-001 which is only $4.50.

http://www.magnusonproducts.com/

(info from QJ on FJ)


3/21/14
i cant update the first post but here is a working link (for now) for install directions

http://www.danhardison.com/focus/pwsc_manual_v2-04.pdf

TexasFoCi 04-21-2014 05:18 PM

my stock Idler pulley looks to be the same exact size as the one on my kit but the gates number is 36200, its listed above as 38018. Anybody know which one or what the difference is??


All times are GMT -5. The time now is 02:13 PM.