Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (http://www.focusfanatics.com/forum/index.php)
-   Drag Racing (http://www.focusfanatics.com/forum/forumdisplay.php?f=96)
-   -   03 zetec 14s (http://www.focusfanatics.com/forum/showthread.php?t=239793)

etayman 09-07-2010 10:27 PM

03 zetec 14s
 
what would I have to do to be able to see at least a 14.99 in the 1/4 if i want to stay NA? can i do it and still run pump gas.

mlbbaseball 09-08-2010 01:52 AM

all boltons, cams, and a FR head, Torsen or quaiffe LSD, clutch and flywheel, and drag radials. that will put u in upper 14's. you need about 200 bhp to see that, or about 155+ whp.

etayman 09-08-2010 04:29 PM

where do you think i will be with CAI, UDP, full 2.5 exaust, JBA long tube header, centerforce clutch, flywheel, 2000 intake mani, head decked .050, 4.06 final drive?

mlbbaseball 09-08-2010 04:33 PM

probably mid 15's.

etayman 09-08-2010 04:35 PM

so do you think that i could hit low 15 with some 7in slicks and a local dyno tune?

mlbbaseball 09-08-2010 09:05 PM

its possible, but not likely. if you had a torsen, maybe! but you'd have to have a 1.9 ish 60'

Bwinkelsas 09-14-2010 02:33 AM

swap in a duratec with light bolt ons will make it easy, zetecs require too much work.

norcalfocus01 09-14-2010 03:11 AM

Dont waste your money on the 2000 IM. The only difference is its a solid one piece, which is nice for boost. Just port your IM. Also the UDP won't make that big of difference. So if you don't have one don't worry about it IMO.

Is your car gutted? That will help a ton too.

If your practiced I think you can run low to mid 15's with those mods. My friend ran a 15.8 in a wagon with a tune, CAI, TB, and OBX headers.

*EDIT*

Here's a video of his 15.8 run. This is well before he did the SVT swap too.

http://www.focusfanatics.com/forum/showthread.php?t=227133

etayman 09-14-2010 10:26 AM

Every one i talk to backs the e2k mani. Y dont you think its worth it?

etayman 09-14-2010 10:27 PM

Im getting the torsen in the next 5or6 days so 15s here i come.


All times are GMT -5. The time now is 10:08 PM.