Ford Focus Forum, Ford Focus ST Forum

Ford Focus Forum, Ford Focus ST Forum (http://www.focusfanatics.com/forum/index.php)
-   Archive (http://www.focusfanatics.com/forum/forumdisplay.php?f=103)
-   -   Group Buy: Matte and Gloss Black Vinyl Wrap (http://www.focusfanatics.com/forum/showthread.php?t=228715)

zx360 04-08-2010 03:12 PM

Group Buy: Matte and Gloss Black Vinyl Wrap
 
Group Buy Requirements:
Me (zx360/ HendricksDesignStudio)
Josh@HendricksDesignStudio.com
start:4/8/10
end: 5/30/10 (hopefully, pending getting enough people)
people needed: 8-10 for each color (depending who orders what)

If we get enough people to do one color and not the other, we will do the color that fills up. Once we have enough interest i will request a deposit of half the cost be sent to me. Then i will get the vinyl and ready it for shipping. Once they are ready to be shipped i will request the rest of the payment.
Please only add yourself to the list if you are seriously interested. Dont wreck this for others by saying you are interested then when it comes time backing out.


Oracal 970 RA Wrap Cast.
High gloss colors with a built-in protective clear coat layer to simulate the appearance of factory paint.
No over laminate required
Exceptional dimensional stability and conformability over curved surfaces, rivets, and corrugations.
Grey solvent-based repositionable adhesive.
Clean removability up to 4 years.

THIS IS NOT the 3m wrap that was given away for free a few months ago. ORACAL is the top of the line wrap vinyl.


Pricing:

Hood: 60 x (4feet) $60
08-10' roof: (4 feet) $60
Zx3/5 roof: (7 feet) $100
ST roof: (5 feet) $80
Wagon roof: (8ft) $120

Shipping is $25
(please make sure that the length will fit your application, ive checked with many people on here for sizing so if a length seems off check and PM me)



Image shows what will be covered when you buy a "HOOD" and "zx3/5 roof" piece (ZXRMB and HOODMB)
http://sphotos.ak.fbcdn.net/hphotos-..._6754003_n.jpg


The options right now will be Gloss or Matte black

If you are interested and have the money to do this, put your name followed by what you want using the key below:

08RMB (08 ^ roof matte black): $60
08RGB (08 ^ roof gloss black) : $60
ZXRMB (zx3/5 ^roof matte black) : $100
ZXRGB (zx3/5 ^roof gloss black) : $100
STRMB (st roof matte black) : $80
STRGB (st roof gloss black) : $80
WRGB (wagon roof matte black) : $120
WRMB (wagon roof matte black) : $120
HOODMB (hood matte black): $60
HOODGB (hood gloss black): $60

Interested in Gloss Black:
FocusFreak09: HOODGB


Interested in Matte Black:
TheMac: HOODMB $$
GrndZero: ZXRMB, HOODMB $$
ProJect 03 SE: STRMB HOODMB $$ 22nd

Any questions please PM me, dont clutter the thread. If its something everyone needs to know i will make sure to post it.

Tom 04-08-2010 04:57 PM

Approved.

TheMac 04-08-2010 06:34 PM

Count me in on the Matte Black hood.. that stuff is like $100+ for the good stuff..

zx360 04-08-2010 06:37 PM

This is "the good stuff" just not at an insane online store price. [thumb]
added you to the list.

Just to give you guys an idea for the roof vinyl, the cheapest i could find online was $140 and that was for the 3m which requires an over laminate and not including shipping. This is a great product at an insane price.

tunedfocuzx3 04-08-2010 07:12 PM

How hard is this to install? Do you have a link to a How-To at all? I'm gonna look into this more, but I should be down to buy the following:

HOODMB
ZXRMB

zx360 04-08-2010 07:27 PM

Its actually pretty straight forward, just takes time and patients.

i think this is the best video of a roof being done. Having 2 people kind of helps. Having a nice squeegee and a hair dryer or heat gun will be needed to install it as well.
YouTube Video
ERROR: If you can see this, then YouTube is down or you don't have Flash installed.

focusZX505 04-08-2010 07:36 PM

08RMB (08 ^ roof matte black): $60

HOODMB (hood matte black): $60

I want in josh but u know that aready PM me i got a few ? about this for ya

GrndZero 04-09-2010 06:21 AM

Very interested.
ZXRMB
HOODMB

zx360 04-09-2010 10:20 AM

we need 1 or 2 more people and we can get this going for the matte black.

BLRich1 04-09-2010 10:40 AM

is this cut to fit or is it just a block size?


All times are GMT -5. The time now is 07:25 AM.