Focus-Power - DIY Turbo Kit Info
 

These kits have been installed on two SVT Focus and both making over 320HP to the wheels. We now feel these kits are production ready.

What You Get:

• SPA Manifold
• 2.5 Down pipe with V-Band clamp for ease of install
• Waste gate down pipe going back into the 2.5 down pipe slip style
• Piping from Turbo to Intercooler
• Intercooler that is 8 x 31 x 3.5 this sucker flows like crazy and cools very well
• Piping from Intercooler to TB
• Piping from Turbo to Filter in the inner fender well
• Bracket for intake piping

Price: (ZX3 or SVT)
$1495.00


Options Will Be:

• Comp Turbo with v-band installed ($795.00 When bought with DIY Kit ) This is a very good spooling turbo yet will make 350HP at the wheels with a built engine
• Adaptor from 3 bolt SPA type waste gate to 2 bolt turbonetics EVO ($45.00)
• Oil pan with bung welded in ($95.00), if you exchange oil pans ($35.00)
• 3 Inch MAF Tube ($78.00)

==========================================
What You Need To Get:

• Turbo
• 3 Inch MAF Tube
• BOV
• Waste Gate
• Hoses (2) 2 inch , (1) 2 to 2.5 , (2) 2.5 , (2) 2.5 to 3 inch (1) 3 inch
• Clamps 16
• Bolts,washers,nuts
• Oil feed line -4
• Oil return line
• Vac lines
• Filter
• Diablo Mafia
• 60lb Injectors

All of these parts can be purchased from eBay or any Turbo stores. Shop around to find the best deals.
==========================================

Remote Tuning:

• ZX3 $550.00 YOU MUST have a A/F Gauge
• SVT $550.00 YOU MUST have a J&S and AF Gauge

In my opinion this will be the best way to turbocharge your Focus, I doubt anything better will ever come out.

==========================================

What about for the Dtec?

I am working with F2 on there kit and he has agreed to make some changes and they are in the works now

Tom

sweet deal wish i had the extra coin but my svt does have a future in fi just need to save up the money

Tom,
i already purchased a Predator from you in NA form. how much is a remote tune for a turbo setup since i already bought the flasher from you?

i assume you need datalogs and dynosheets to accurately remote tune correct?

I charge 550.00 to do a complete FI tune and that comes with free updates as you add more mods or more boost

I need datalogs yes , when finished you can go to a dyno if you choose to see how it is doing

Tom

you mention Comp Turbo.....which one?

i assume that its the CT3 50?

I dont say what custom turbo they do for me , I can sell you one if interested

Tom

what's the price difference for a turbo that's in the 500hp range?

If you stay with the STD bearing then the cost is the same , If you go to BB the it almost doubles the price in the 1300 range

Tom