Ford Focus Forum, Ford Focus ST Forum

Ford Focus Forum, Ford Focus ST Forum (http://www.focusfanatics.com/forum/index.php)
-   Focus-Power Tuning (http://www.focusfanatics.com/forum/forumdisplay.php?f=72)
-   -   XCAL testimonial (http://www.focusfanatics.com/forum/showthread.php?t=225076)

Juantron 03-01-2010 10:52 AM

XCAL testimonial
 
I have had my Focus for nearly 6 years now since I bought it off the Ford lot brand new. In that time, I've done my share of bolt-on modifications, and some of them actually increased my power. In February, I started looking into a tune, and upon research on the Focus Fanatics forum I quickly learned that Tom is the way to go for anything having to do with tuning a Focus. So I contacted Tom and ordered my XCAL3 which cost me $415 including shipping (I'm in-state). As soon as I got my XCAL, I got in touch with Tom and sent him a list of my engine modifications. Over the next couple of days, I felt like I had my own personal trainer for my Focus, ROFL. We went 4 rounds of him sending me a tune file, me going out and making a datalog, getting back and sending the datalog to him, and calling him to discuss the datalog session and see where we could tweak some more power in there. By the 4th round of datalog, I had a new car. I have no stumble at any RPM range, (which I had before the tune), and I can't wait to get to the dyno next weekend to see what I'm putting down now. The reason I am posting this testimonial is because I was so impressed with not only the outcome of the tune, but how considerate Tom was to spend all that time with me getting everything right (I mean its not like he's building a house, performing spark plug dyno tests, and designing the "squaire-tube" headers too...). So if you are on the fence of getting a tune or not getting a tune, please take my advice, this dude knows his [:)][neener][:)]...and get a wideband for optimal results!

[werd]

firelink74 03-01-2010 11:35 AM

good for you bro, gl on the dyno!

focusmaniaczx3 03-01-2010 02:46 PM

i am my own testimony to procrastination. ive had a tune from tom paid for for over a year now and have not been able to get around to datalogging so i can actually get the tune [hihi] perhaps i should get my rear in gear

Juantron 03-01-2010 02:47 PM

If you're coming to the SFT meet, I would be happy to help you datalog.

focusmaniaczx3 03-01-2010 03:10 PM

that would be greatly appreciated as i have never been able to successfully datalog with a wideband A/F analog input. wiring and electrical just is not really my thing

Juantron 03-01-2010 03:12 PM

Grab a 6-pin to 6-pin Firewire (IEEE1394) cable and bring it to the meet and I'll hack it up for you and get everything going. It's not as hard as it seems, and I can do it in probly 15 minutes. Where are you mounting your wideband?

Juantron 03-01-2010 03:39 PM

http://www.amazon.com/meter-IEEE-139...7479381&sr=8-6

That one is pretty cheap, you should be able to get it before the meet too.

focusmaniaczx3 03-01-2010 09:12 PM

my wideband is in my pillar pod. ill get that wire

Juantron 03-02-2010 06:39 AM

Quote:

Originally Posted by focusmaniaczx3 (Post 3177113)
my wideband is in my pillar pod. ill get that wire

Cool, make sure you have access to the signal wire coming off the wideband. Its the white wire in case you didn't know.

Juantron 03-24-2010 03:43 PM

Quote:

Originally Posted by joshtimber81 (Post 3209767)
When the next SFT meet is going to happen?

Ford F150 Parts

I have no clue...the last one was a bust and I doubt I will ever try to attend another.


All times are GMT -5. The time now is 07:27 PM.


http://www.focusfanatics.com/aboutus/copyright.asp