Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (http://www.focusfanatics.com/forum/index.php)
-   Massive Speed (http://www.focusfanatics.com/forum/forumdisplay.php?f=102)
-   -   !Massive UNBREAKABLE Lower Motor Mount V1.1 Released!! (http://www.focusfanatics.com/forum/showthread.php?t=212592)

K Dog 09-30-2009 08:27 PM

!Massive UNBREAKABLE Lower Motor Mount V1.1 Released!!
 
The Massive UNBREAKABLE has earned its reputation as THE mount to have, and this has made it a wild success for us. Massive has sold a great number of these mounts since their release over 1.5 years ago. To this date, we have not recorded a SINGLE FAILURE.

Not ones to rest on our laurels, we have refined and brought you the even further superior V1.1 UNBREAKABLE mount.
  • Higher 80 durometer custom made Massive Purple Bushings
  • Our High Strength Hardware Kit

http://zeebone.com/gallery/d/77739-2...r+Mount+V2.jpg

Here's what we have to say about these "mighty mounts":

High torque Foci with power adders regularly tear not only the stock/aftermarket bushings, but have been known to shatter the aluminum dogbone itself. While this is undesirable enough, the resulting free motion of the engine can cause damage magnitudes greater such as axle breakage, radiator puncture and shifter cable separation. How do we know? We’ve had it happen too many times… Massive has finally put an end to these woes by offering a truly STRONGER solution. Excessive wheel hop plagues the car in standard form. Not only is this an embarrassing stop light antic, but of course it will seriously impede your ability to smoke that Camaro or Cobalt in the next lane. This also puts incredible shock and abuse on all drive line components and is the leading cause of axle failure. A cast steel alloy mount contains custom Massive spec polyurethane bushings for the best in motion control. Adds some real stiffness to the motor, drastically reducing movement. Expect better shift feel, no more loud banging noise from the stock mount bottoming out on hard shifts, less wheel hop, and more power to the ground! This MSS mount replaces the entire “dog bone” assembly. These mounts also are designed in such a way that the inserts can not come dislodged from the housing.

Massive ALSO includes our complete HIGH STRENGTH HARDWARE kit! Even stock foci have been know to break OE hardware, and with the added stiffness of your new mounts, failure of low grade stuff is inevitable. Often times corrosion will make re-using factory hardware impossible. We selected the highest quality high vis Mil spec blue coated grade 12.9 European hex head cap screws for the ultimate in strength.

Very straight forward installation. If you need assistance, let us know and we’ll walk you through it! Should take less than 1 hour for the average car guy (or girl). Kit comes with instructions. Custom made of high carbon steel for superior durability. Metallic Silver with signature Massive PURPLE bushings. Super high quality construction. Quality made right here in the USA!!!

Just $79!!!

Find em Here!!!

mellephants 05-07-2012 01:55 PM

KDOG

Do you still sell the whole unbreakable mount? I only see the bushings on your website.

focusZX505 05-07-2012 04:42 PM

How about for the 08+ my bushings are kinda worn
Posted via FF Mobile

K Dog 05-07-2012 05:01 PM

No, the steel housing was discontinued by supplier so unfortunately they are no longer avail.

We will have an "EZ-Mount" shortly though, that will have the Massive bushings pre-installed into an aluminum housing, greatly reducing install times. This will be offered in an 00-07 and an 08-11 version.

mellephants 05-07-2012 05:04 PM

Quote:

Originally Posted by K Dog (Post 4152362)
No, the steel housing was discontinued by supplier so unfortunately they are no longer avail.

We will have an "EZ-Mount" shortly though, that will have the Massive bushings pre-installed into an aluminum housing, greatly reducing install times. This will be offered in an 00-07 and an 08-11 version.

Blast! Thanks for the information.

freemind 07-04-2012 06:33 AM

I have one and it is beyond night and day.

atxcontracting 07-05-2012 01:06 PM

Do you have these for a 2002 Sedan? How is the vibration? Do you have the other mounts as well? I'm looking to replace all 3, while I'm under there. But its a daily driver and highway car, I'm looking for no vibration.

K Dog 07-09-2012 12:50 PM

We offer the lower mount inserts only at this time. If your looking for a DD level of vibrations - you honestly dont want all 3. The lower inserts by themselves will control motion and offer a relatively livable driving experience.

bbcobra 11-13-2012 09:25 PM

would you happen to know if these would fit my VF Engineering lower mount. One of mine has popped out (one side of the smaller bushings). I hope they do, but I don't have a stock dogbone to compare mine to.

K Dog 11-14-2012 09:54 AM

Our inserts would not fit the VF housing, no.

We can offer you them already installed into a factory AL housing though, powder coated of course.

Cost is $69.


All times are GMT -5. The time now is 08:44 PM.