Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   Focus Tuning Chat (http://www.focusfanatics.com/forum/forumdisplay.php?f=79)
-   -   Safeguard help (http://www.focusfanatics.com/forum/showthread.php?t=211032)

3rdgeneration 09-14-2009 05:22 PM

Safeguard help
 
hey friends. ive been trying to get the j&s to work for days now. and i cant get it to work. ive read the threads up and down both here and fj and cant figure out the problem. the only thing i could think of is maybe the knock sensor is bad.Or i used a vampire tap for pin57 and maybe i need to hard wire it? I have looped the ground. I emailed john and j&s but i want to see if you guys have any ideas?

illinipo 09-14-2009 07:26 PM

what are your symptoms

3rdgeneration 09-14-2009 08:44 PM

when i do the test nothing happens the led doesn't light up so i thought maybe i wired it wrong double checked everything looks correct. i did use a 16 gauge wire to ground the second ground wire thats with the clear wire,even though its a 14 gauge maybe thats the problem? its either that or bad j&s or knock sensor

pitchedblack04 09-14-2009 08:59 PM

And you plugged the vacuum/boost line?

3rdgeneration 09-14-2009 09:08 PM

no tom told me not to.

pitchedblack04 09-14-2009 09:30 PM

How are you testing it? Sitting still and having someone rev the engine while you tap on the block?

3rdgeneration 09-14-2009 09:39 PM

yeah i set the first two white switches up turn the sensitivity all the way up and had someone tap the bolt near the starter that goes into the block, at 2000 rpms

pitchedblack04 09-14-2009 09:52 PM

Well it doesnt do anything if its in a vacuum. So for testing purposes have you blocked off the vacuum source?

3rdgeneration 09-14-2009 10:02 PM

oh no, so i have to plug the vacum input on the j&s? to test it? im a little confused now tom said not to hook it up to a vacuum line ever, so the j&s will never be experiencing vacuum.

illinipo 09-14-2009 10:04 PM

plug it or just unplug the vac line they will both do the same thing. Just make sure you stop up the vac line so you dont have a vac leak.


All times are GMT -5. The time now is 03:08 AM.


http://www.focusfanatics.com/aboutus/copyright.asp