Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (http://www.focusfanatics.com/forum/index.php)
-   Focus Tuning Chat (http://www.focusfanatics.com/forum/forumdisplay.php?f=79)
-   -   How-to Hook up AEM UEGO to X3 for Data Logging (http://www.focusfanatics.com/forum/showthread.php?t=208874)

gonefhsn 08-20-2009 08:31 PM

How-to Hook up AEM UEGO to X3 for Data Logging
 
Ok I am not sure that this goes here. When I was hooking up my AEM to data log it I searched and searched and found nothing that really helped. So I spent a couple days messing with thing till I got it to work. So here is my Write up.

First get your fire wire cable and whack an end off (needs to be a 6 pin). Now you should have a Red, White, Green, Orange, Black and Blue.

Next go here http://www.tricktuners.com/data_logging_info.htm they have the pin out correct but the colors may be off I performed a continuity check to get the colors correct for the pins.

Once you have the color combination ground out all three Grounds (in my case it was black, orange and red). Then hook up the analog 1 wire (which is pin 3) from the fire wire to the white +5 wire from the AEM gauge.
http://i198.photobucket.com/albums/a...p/IMGA0047.jpgas you can see I used the green wire from the fire wire cable to the white on the AEM gauge.

You now must go in to your X3 and set up your analog reading.http://i198.photobucket.com/albums/a...p/IMGA0050.jpg
http://i198.photobucket.com/albums/a...p/IMGA0051.jpg
http://i198.photobucket.com/albums/a...p/IMGA0052.jpg
http://i198.photobucket.com/albums/a...p/IMGA0053.jpg

Plug in your fire wire cable and start the car
http://i198.photobucket.com/albums/a...p/IMGA0055.jpg
once you do that you will see the wide band registering on your X3.
http://i198.photobucket.com/albums/a...p/IMGA0056.jpg

This next portion is if you want to data log using Live Link Software.
Once you have that shut the car off open live link, hook up the Xcal to your laptop using a USB Cable, Turn the key two clicks (do not start car) Hit the little graph up in the top left corner and the system will connect to your car and open the select signals menu select your signals, make sure to select analog 1 so you can get your analog readings. After you made your selections hit ok.http://i198.photobucket.com/albums/a...0Help/PIDS.jpg
You must select other PIDS or it wont read (at least I did)
Now you must go to the commands tab, select analog equations http://i198.photobucket.com/albums/a...commandtab.jpg
Check the block behind Analog 1 EQ, use the drop down to select AEM then apply change, ok.http://i198.photobucket.com/albums/a...p/Equation.jpg
Now when you start the data logging session if you get this error just hit ok
http://i198.photobucket.com/albums/a...p/IMGA0058.jpg

Start the car you will be able to see your wide band registering in live link with the proper A/F reading.
http://i198.photobucket.com/albums/a...p/IMGA0059.jpg

If you do not set the equation all you will see is a voltage reading. And your tuner needs the proper A/F reading for data logging. Hope this helps you guys out in hooking up your AEM UEGO. Now this may as well work with with other UEGO Gauges but I can not say since I have an AEM one.

daveyboy 08-20-2009 11:23 PM

Not a bad write up. What made you deside on the AEM as opposed to the others. Just curious.

gonefhsn 08-20-2009 11:26 PM

A recommendation

tetra 08-21-2009 08:36 AM

Too bad this doesn't work for 2008+ ECU's :(

coupefocus 08-22-2009 02:38 PM

why won't this work for the 08s+? i jsut got my x3 in the mail and i have already installed my aem wideband.

do you just have to use a different equation?
or is it just some stupid ecu problem?

gonefhsn 08-22-2009 05:02 PM

They say it is a ecu problem. But i dont understand why when this is an analog connection to the x3

CJohn364 08-22-2009 05:27 PM

Nice write up, Josh. Nice to see you finally got it to read right. Do you still need to do the WOT datalogging?

gonefhsn 08-22-2009 09:09 PM

Nope it is all dialed in

CJohn364 08-22-2009 09:18 PM

Sweet.

Roushturboedzx3 08-23-2009 06:41 PM

Not to down you but there was already a write up that shows all of this. but still good write up


All times are GMT -5. The time now is 06:43 AM.