Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   Focus Tuning Chat (http://www.focusfanatics.com/forum/forumdisplay.php?f=79)
-   -   p1000 (http://www.focusfanatics.com/forum/showthread.php?t=198090)

ab0ybrush3dr3d 05-05-2009 12:30 AM

p1000
 
I live in New york state and we have an obd2 test where it plugs in and communicates to the DMV, will it pass with this code because i know you can have atleast 1 not ready, is this one of them?

wildfire329 05-05-2009 01:21 AM

if you got this code, it usually pop's up every time you load a tune custom or stock, the ecm needs some running time to collect some data for comparison ( the long term fuel bank maybe?). anyways, u can try disconnecting your neg. battery cable for 30 min. to reset the ecm, just 2 b throe, then drive it around for 20 min. before you go in for your test.[cheers]

illinipo 05-05-2009 02:23 AM

1000 is the system readiness code, you will not pass.

go drive for a while until the code clears.

1turbofocus 05-05-2009 07:37 AM

Just get your tuner to turn it off

Tom

WRCwannabe 05-05-2009 07:41 AM

i always get that code too.
tom i have your tune, how come it always comes up then?

i have an airbag light on from a long time ago.

Blivit 05-05-2009 07:44 AM

Quote:

Originally Posted by WRCwannabe (Post 2730177)
i always get that code too.
tom i have your tune, how come it always comes up then?

i have an airbag light on from a long time ago.

The airbag light is not something that can be disabled in a tune; it's a separate module.

WRCwannabe 05-05-2009 08:03 AM

i know that, but ive read somewhere it sends the car into a diagnostics mode.

Blivit 05-05-2009 08:47 AM

Quote:

Originally Posted by WRCwannabe (Post 2730205)
i know that, but ive read somewhere it sends the car into a diagnostics mode.

Not that I've seen.

1turbofocus 05-05-2009 01:07 PM

Me either

I rarely turn off the P1000 code because it does not really mean anything

Tom

focusguy87 05-05-2009 04:00 PM

Quote:

Originally Posted by illinipo (Post 2730053)
1000 is the system readiness code, you will not pass.

go drive for a while until the code clears.

That code has never cleared for me. I have it for 2 years since my first tune.


All times are GMT -5. The time now is 04:26 AM.


http://www.focusfanatics.com/aboutus/copyright.asp