Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (http://www.focusfanatics.com/forum/index.php)
-   Archive (http://www.focusfanatics.com/forum/forumdisplay.php?f=103)
-   -   2000 Intake, Misc for Sale (http://www.focusfanatics.com/forum/showthread.php?t=197744)

02ztsian 05-01-2009 07:25 PM

2000 Intake, Misc for Sale
 
Time to clear out some stuff I have been accumulating; I need to get working on the Merkur!

1. Ported 2000 Zetec Intake manifold. I opened up the opening to accommodate a 65mm T/B, plus I ported the throat to remove the pinch point. I also removed the hump under each injector in each of the runners. I added extra material to the affected areas as the port job breaks through the manifold on the two outside runners and the throat. I gave these areas a quick shot of semi-gloss paint to blend in the grey of the JB Weld.
Pics...sorry about some of the lighting but my camera's macro turns off the flash.

http://i29.photobucket.com/albums/c2...n/DSCF3773.jpg
http://i29.photobucket.com/albums/c2...n/DSCF3775.jpg
http://i29.photobucket.com/albums/c2...n/DSCF3776.jpg
http://i29.photobucket.com/albums/c2...n/DSCF3777.jpg
http://i29.photobucket.com/albums/c2...n/DSCF3778.jpg
http://i29.photobucket.com/albums/c2...n/DSCF3779.jpg

Down the hole...
http://i29.photobucket.com/albums/c2...n/DSCF3780.jpg

Each runner...
http://i29.photobucket.com/albums/c2...n/DSCF3782.jpg
http://i29.photobucket.com/albums/c2...n/DSCF3783.jpg
http://i29.photobucket.com/albums/c2...n/DSCF3784.jpg
http://i29.photobucket.com/albums/c2...n/DSCF3785.jpg

Price: $150 shipped anywhere in Canada or US except AK/HI. This will make things easier for anyone interested in this particular item.

2. Stock T/B for 2000-2002.5, manual trans Zetec.
Includes the bracket and the TPS; the motor has only 33K km on it.
Price: $25 plus shipping TBD.
http://i29.photobucket.com/albums/c2...n/DSCF3770.jpg

3. Used Zetec oil pan-I wire wheeled it clean and shot it with some Tremclad semi gloss paint. It has one dent on the front corner about the size of a quarter.
Price: $20 plus shipping TBD.
http://i29.photobucket.com/albums/c2...n/DSCF3766.jpg
http://i29.photobucket.com/albums/c2...n/DSCF3768.jpg

4. Lower crankcase for Zetec motor. I also have the oil pickup to go with this if you want.
Price: $20 plus shipping TBD.
http://i29.photobucket.com/albums/c2...n/DSCF3772.jpg

All items are from the same 2002 33k km Zetec going into my Merkur project (except the intake).

Location: Calgary, Alberta Canada.
Paypal unless a local pick up is preferred; I am Verified and Confirmed on Paypal and have a 100% rating on e-Bay as ian.mcc No extra fees for Paypal, and I will charge actual shipping as best as the online calculators can determine.
Questions? Offers? Pm me as I am on here lots.

02ztsian 05-01-2009 09:00 PM

Also have an A/C mounting plate.
Price: $20 plus shipping TBD.
http://i29.photobucket.com/albums/c2...n/DSCF3678.jpg
http://i29.photobucket.com/albums/c2...n/DSCF3677.jpg

02ztsian 05-06-2009 08:30 AM

Bump it up!

02ztsian 05-25-2009 03:27 PM

Bump-will trade the intake straight up for a good 2" or a 2" flex pipe.

02ztsian 06-04-2009 09:26 AM

Intake is now sold!

dreamer33917 06-06-2009 12:03 AM

hey if the intake manifold is sold could you tell me how port polish a manifold i just got a 65 mm how much dose it cost


All times are GMT -5. The time now is 04:45 PM.