Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (http://www.focusfanatics.com/forum/index.php)
-   ZETEC Performance (2000-2004) (http://www.focusfanatics.com/forum/forumdisplay.php?f=39)
-   -   EGR Delete plate (http://www.focusfanatics.com/forum/showthread.php?t=192249)

allanzx3 03-18-2009 11:42 AM

EGR Delete plate
 
Does anyone make an EGR delete plate for the head side? I recently built a tune to disable my EGR(along with other things) and now i want to pull all the useless crap out.

I can block the header side no problem (remove the tube, cut the end and plug it) but im looking for a prefabed plate for the head side.

faster_than_u 03-18-2009 11:55 AM

jay racing makes one

http://www.jayracing.com/index.php?m...roducts_id=195

allanzx3 03-18-2009 12:02 PM

You have a website?

besthaticouldo 03-18-2009 12:03 PM

i just used a quarter dude...just sandwich a quarter in between the egr port and the tube and voila. you can even keep it there for emissions if you have those up there.

allanzx3 03-18-2009 12:11 PM

Nm checked his page and nothing there.

allanzx3 03-18-2009 12:12 PM

No emissions here at all.

If i can find a plate i guess ill just have to pull it off, trace it out and make my own block off plate. I was just trying to be lazy.

besthaticouldo 03-18-2009 12:12 PM

im telling ya dude...quarter trick. its cheap, it works, i bet you have the stuff to do it.

lol done deal.

allanzx3 03-18-2009 12:13 PM

I was playing on using a quater or nickle or whatever for the header side though and cutting the pipe after it for now.

besthaticouldo 03-18-2009 12:15 PM

yea you can do that for both sides.

i seriously ran it like that on my cammed zetec for about 12k miles and i never ever had a problem.

allanzx3 03-18-2009 12:16 PM

Well technically i have the egr system disabled. Set the EGR value to 0 and flatened all the tables for the egr in the ecu to 0 so there is no chance of it opening. Now im just looking to remove all the un needed parts.


All times are GMT -5. The time now is 11:37 AM.