Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (http://www.focusfanatics.com/forum/index.php)
-   General Technical Chat (http://www.focusfanatics.com/forum/forumdisplay.php?f=47)
-   -   vacuum hose diagram (http://www.focusfanatics.com/forum/showthread.php?t=175996)

X-Rated 10-12-2008 11:57 PM

vacuum hose diagram
 
I have looked (even in my repair manual) for the vacuum hose diagram for my zetec engine.

Can anyone help? Need pics even if it's a PDF file [?|]

Thanks!

malim 10-13-2008 12:19 AM

I didn't know what engine you had so here is for Zetec and SPI. (shoot me rep if i helped [wrenchin] )

SPI Vacuum Diagram
http://img101.imageshack.us/img101/4...ivacuumiy9.jpg

Zetec Vacuum Diagram

http://img411.imageshack.us/img411/6...cvacuumtz6.jpg

X-Rated 10-13-2008 12:34 AM

Thanks! That was quick! This is very helpful & sorry, my signature stuff isn't popping up under my posts. I have the zetec engine.

I am thinking of doing the HHO gas thing and needed to see where everything was to hook it up.

atandt3k 12-29-2008 07:21 PM

Do you have a link to the Zetec Vac diagram, it is not comming up on the screen.

raisdfist 05-05-2009 08:25 PM

Quote:

Originally Posted by X-Rated (Post 2389886)
Thanks! That was quick! This is very helpful & sorry, my signature stuff isn't popping up under my posts. I have the zetec engine.

I am thinking of doing the HHO gas thing and needed to see where everything was to hook it up.

let me know how this goes, I was thinking for a long time about doing it too but i am hesitant, I got a motorcycle engine that im will be trying plasma spark on this summer probably though =)[headbang]

X-Rated 06-09-2009 09:23 PM

Quote:

Originally Posted by raisdfist (Post 2731378)
let me know how this goes, I was thinking for a long time about doing it too but i am hesitant, I got a motorcycle engine that im will be trying plasma spark on this summer probably though =)[headbang]

Sorry for the late comeback raisdfist but it worked well....for about 3 days. I pushed 53MPG then the tower had a meltdown and I haven't replaced anything yet, been too busy with other issues. Hope this helped even tho I was late on the response. [cheers]

focusmaniaczx3 06-09-2009 10:37 PM

just curious but is HHO gas like a hydrogen injection kit? got any pics?

X-Rated 06-10-2009 12:07 AM

Quote:

Originally Posted by focusmaniaczx3 (Post 2787247)
just curious but is HHO gas like a hydrogen injection kit? got any pics?

This is a picture (not completely wired) of the HHO installed in the engine compartment. It is sitting on a fabricated base and bracket. Also, here is the wiring diagram for it, I bought everything off Ebay for around $30, and yes, it's like a hydrogen injection kit.

After all is installed all you need to get is DISTILLED WATER (gallon jug goes a long way) and a box of BAKING SODA (only use 1/4 to 1/2 teaspoon or you will have a major meltdown like I did (see picture below), notice the plexiglas on the top notch, too much baking soda caused more juice than needed, melted the notch and made contact with the negative side)

Hope this helps you out focusmaniaczx3!

http://i55.photobucket.com/albums/g1...29081635-1.jpg
http://i55.photobucket.com/albums/g1...ingDiagram.jpg
http://i55.photobucket.com/albums/g1...nd95/tower.jpg

DanielSVT 07-27-2009 03:28 PM

im looking for the SVT vacuum hose diagram thnaks

malim 01-11-2013 03:35 PM

Can't edit my original post for some reason, so just reposting.

Zetec Vacuum Diagram
http://i.imgur.com/kph6e.jpg


All times are GMT -5. The time now is 11:51 AM.