Ford Focus Forum, Ford Focus ST Forum

Ford Focus Forum, Ford Focus ST Forum (
-   General Technical Chat (
-   -   Accessory Drivebelt Replacement (SPI) (

S2 10-01-2008 04:35 PM

Accessory Drivebelt Replacement (SPI)
Accessory Drive Belt Replacement (original by TeamFocus)

Vehicles with 2.0L SPI Engine


1. Raise and support the vehicle. For additional information, refer Here.

2. Remove the accessory drive belt splash shield.

3. Lower the vehicle.

Remove the accessory drive belt.

l. Using a 3/8 inch square drive breaker bar in the hole provided, rotate the tensioner clockwise.


1. To install, reverse the removal procedure.

All times are GMT -5. The time now is 09:53 AM.