Ford Focus Forum, Ford Focus ST Forum

Ford Focus Forum, Ford Focus ST Forum (http://www.focusfanatics.com/forum/index.php)
-   General Technical Chat (http://www.focusfanatics.com/forum/forumdisplay.php?f=47)
-   -   My Focus is Sick: PATS Wiring Placement (http://www.focusfanatics.com/forum/showthread.php?t=168281)

ewick12 07-30-2008 03:18 PM

My Focus is Sick: PATS Wiring Placement
 
I need some help please! My 2000 Focus is sadly stuck on the driveway until I fix it. I don't want to have to get it towed to the dealer so I'm hoping you guys can help me out. I need to replace the wiring that plugs into PATS transceiver. I just picked up the new part from the dealer (image 2) but the wires aren't the same color as the ones already in my car.

There are four wires (image 1) with different colors and I need to know where each one goes. The wires plug into the transceiver which is right below the ignition cylinder (image 3). I'm hoping to get my Focus back into driving condition so any help is really appreciated!!

Image 1
http://img170.imageshack.us/img170/3...0057wy6.th.jpg

Image 2
http://img389.imageshack.us/img389/8...0059wd9.th.jpg

Image 3
http://img410.imageshack.us/img410/8...0058bx0.th.jpg

JRODSVT 07-30-2008 03:46 PM

1 Attachment(s)
hear you go!

ewick12 07-30-2008 04:25 PM

Thanks a lot for helping. I tried to put the wires in that order. From top to bottom in my my first picture, I put it in order 1, 3, 2, 4 and also 1, 2, 3, 4 and I'm still getting the PATS light blinking when I try to start the car. Is that the right order according to your diagram?

JRODSVT 07-30-2008 05:19 PM

I would say yes because it is from Ford own manual.

by switching 2 and 3 though you may have shorted out the new module.

richard1987 05-18-2011 11:42 AM

hey guys i need help i need to know where the wires from the pats transceiver go to the ecu i already know what they do decause of what i have seen here but need to know were the go to the ecu

rob231989 01-20-2013 05:31 AM

does anybody know which of these wires to bridge to bypass the reciever

TerryB 01-20-2013 05:48 AM

You need to post info about what you're driving. Here's a site that list Ford wiring. Look for your year and model.
http://www.the12volt.com/installbay/...eard/Ford.html

rob231989 01-20-2013 05:55 AM

hi its a mk1 focus 1.6 16v zetec the same wiring as shown previously in the thread

TerryB 01-20-2013 05:59 AM

Start here I would guess.
http://www.the12volt.com/installbay/....asp~TID~41039

whynotthinkwhynot 01-20-2013 08:54 AM

Quote:

Originally Posted by rob231989 (Post 4547949)
does anybody know which of these wires to bridge to bypass the reciever

That is asking us how to fix the car so it can be stolen. That's why you're having problems getting an answer. You've also brought back a 4 year old thread.


All times are GMT -5. The time now is 01:19 PM.