Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   MK1 Focus (http://www.focusfanatics.com/forum/forumdisplay.php?f=45)
-   -   Ford Edge Rear Wiper help. (http://www.focusfanatics.com/forum/showthread.php?t=152045)

BeeFzX3 03-03-2008 09:54 PM

Ford Edge Rear Wiper help.
 
I've read people are replacing rear wiper with Edge wiper.
Now I don't know what I need to perform this little mod.[dunno]

Here is the picture and parts that make up Edge rear wiper assembly:
1) Wiper arm 2) Wiper arm Nut 3) Wiper arm Cap
4) Wiper arm Seal 5) Blade assy 6) Wiper motor
7) Wiper motor Screw 8) Washer hose Front
9) Center #1
10) Center #2 11) Washer hose Rear

http://www.trademotion.com/schematics/M/MS07570.gif

Do I need #2,3,4,5,1. Or just 5 and 1?
Thanks!

Spinal 03-03-2008 10:03 PM

im a little lost in that diagram so ill just tell you what i did...lol

1) flip up cover on stock wiper that houses the arm assembly aka the spline and bolt thingy
2) take bolt thingy off the nurled spline, bit of a PITA but it comes off
3) slide edge wiper blade over
4) put the bolt thingy back on, don't over tighten it otherwise the glass will crack also make sure the wiper/arm is level i put it right on the heated wire thing so it never freezes lol
5) enjoy

BeeFzX3 03-03-2008 10:06 PM

Did you just buy wiper arm and the blade?

BeeFzX3 03-04-2008 01:58 PM

bump

mister_bin 03-04-2008 02:45 PM

yeah man just the wiper arm you dont need anything else..

faster_than_u 03-04-2008 08:40 PM

ya just # 1

Chadinfocus 03-04-2008 10:00 PM

i got the arm and wiper, i needed a new blade anyway.http://i196.photobucket.com/albums/a...1Image0005.jpg

stoopidsteve87 03-04-2008 10:06 PM

sooo...just to reiterate....the "blade assembly" (#5 in the diagram) isn't needed? wait...that's just the blade itself isn't it...lol, so just the wiper arm and it'll go right on without any tampering and all? sweet...

Khanaar 03-04-2008 10:22 PM

I did this mod and it doesnt work for me, so im back on stock wiper, i dont know what makes my focus so different to not have it work right, the blade misses the top of the window completely

BeeFzX3 03-04-2008 11:58 PM

Thanks for the info! I'll go order it tomorrow. Hopefully I can get it on Friday


All times are GMT -5. The time now is 01:13 PM.


http://www.focusfanatics.com/aboutus/copyright.asp