Focus Fanatics

Focus Fanatics (http://www.focusfanatics.com/forum/index.php)
-   MK1 Interior Mods & Upgrades (http://www.focusfanatics.com/forum/forumdisplay.php?f=46)
-   -   How To: Lock Switch Lights (SVT) (http://www.focusfanatics.com/forum/showthread.php?t=104490)

Rudel 11-20-2006 10:11 PM

How To: Lock Switch Lights (SVT)
 
Tools you will need:
http://www.vmfa-531.com/Ford_Focus_S...h_Light_07.jpg
  1. Solder Iron
  2. Solder
  3. Pliers
  4. Wire Stripper
  5. 16-18 Gauge Wire (Threaded)
  6. 1/4 Wratchet
  7. 1/4 Wratchet Extention
  8. T-20 Torx Bit
  9. Power Source Detector (Clear Orange Thing)
  10. Zip Ties
http://www.vmfa-531.com/Ford_Focus_S...h_Light_02.jpg

Begin by using the 1/4 wratchet with the extention and T-20 torx bit and unscrew the bolt that is holding the door handle, lock, and switches.

Once that is done, pull on the face plate until it comes off. It may take some M.A.N.[strongman]

http://www.vmfa-531.com/Ford_Focus_S...h_Light_03.jpg
Now take about 4 peices of wire, 8in each, and strip the ends about 1/4" inch, and start to twist the threaded end.

Now tin the ends of them so they will not bird-cage on you when they are pushed into the socket terminals.

For the following instructions there is no need to do any more soldering, all you have to do us snug the wire into the back of the sockets with the other wire(s). After that zip tie them so they are not all dangling around.......

http://www.vmfa-531.com/Ford_Focus_S...h_Light_04.jpg
On the back of the socket for the window switch do the following:

Put the ground (blue) wire into socket 1, with the Black Wire
NOTE: Passenger side is socket 4, with the Black Wire

Put the Hot (red) wire into socket 10, with the Blue/Green Wire
NOTE: Passenger side is socket 2, with the White/Green Wire
http://www.vmfa-531.com/Ford_Focus_S...h_Light_05.jpg
On the back of the socket for the lock switches do the following:
Put the ground (blue) wire into socket 4, which is the LED Ground.
Put the Hot (red) wire into socket 5, which is the LED 12V Supply.

And the outcome!
http://www.vmfa-531.com/Ford_Focus_S...h_Light_06.jpg

Here is a diagram incase you need more reference:
http://www.vmfa-531.com/Ford_Focus_S...h_Light_01.jpg

R3d_RovrZX3 11-20-2006 10:17 PM

u meanie...i was going to write that how-to tomorrow! haha, well done...i can vouch for everything he said...the wiring is accurate...if u accidentally touch certain wrong wires...u will probably blow the 25 amp fuse for the windows...so you might want to have one of those on hand as well

R3d_RovrZX3 11-20-2006 10:23 PM

I vote that this how-to replaces the link labled "Door Lock LED Connection (Lighted Switches) Instructions" under the complete how-to archive because that link is no longer working...

zx360 11-20-2006 10:42 PM

thats a very good how-to, good work, and it looks awesome

OrangeSVTguy 11-20-2006 10:46 PM

you know i've been wanting to do this for so long, i think since i first bought the car new over 2 years ago... now i think i have a project to do very soon. great write up as well [thumb]

sticky this [:D]

i have some orange LEDs left over as well [:D] time to get rid of that awlful green color

**added**
oh yeah, what gauge wire did you use? 16ga?

UtahSVT 11-20-2006 11:20 PM

So this gets the lock and window symbols to "light up"? Maybe I just haven't been paying attention but I thought they already did light up?? Also the 4 pieces of wire you use to stick in the socket thing, do you splice those into anything??

Rudel 11-21-2006 05:54 AM

Thanks guys! [:)]

I used 18 gauge since it's only an LED. THe window locks are already lit up. It is the lock switches that some people have that are not.

There is no splicing of the wires, your going to just stick the tinned end of the wire into the back of the socket (plug) it should fit nice and snug with no need to cut wires. You need 1 ground wire and 1 hot wire for a total of 2 wires for each door.

babyface 11-21-2006 08:07 AM

u jerk, lol, i wish i could make diagrams like that.

S2 11-21-2006 08:46 AM

Added to the HOW TO ARCHIVE!!!

babyface 11-21-2006 01:22 PM

and rudel, no wonder urs looks easier, u only have two windows to deal with, i had 4, lol


All times are GMT -5. The time now is 11:16 PM.


http://www.focusfanatics.com/aboutus/copyright.asp